Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fresno Homeowners Choose CGI Construction
Bradford Remodeling Co Fresno provides independent CGI construction repair and installation across Fresno Cgi service, covering everything from Fenix NTM cabinet doors to standing seam metal roof panels. We are not an authorized CGI dealer and we do not pretend to be one. What we are is a local Fresno crew that has opened up, repaired, and reinstalled enough CGI product in this valley to know exactly how it fails, what it takes to fix it right, and when a repair is not worth your money. Curtis Lane runs our shop, and the crew he leads has been handling CGI cabinetry, solid surface, and metal roofing jobs in Fresno since 2008. Call (559) 785-2712 if you need a straight answer on a CGI problem.
Why Trust Bradford Remodeling Co Fresno for Your CGI Construction?
CGI product is straightforward to work on when you respect what it is. Fenix NTM is a dense, matte laminate surface that manufacturers press onto MDF or particleboard cores under heat and pressure. TFL is a similar animal: a resin-impregnated decorative paper fused to a substrate, usually particleboard or MDF. Both materials handle Fresno’s dry heat fine, but neither one forgives moisture or bad installation. A contractor who treats a CGI cabinet box like a generic oak box from a lumberyard is going to create problems, not solve them. We do not make that mistake.
Curtis grew up in Los Angeles and picked up his first framing hammer doing weekend work with his uncle before enrolling in the construction technology program at Los Angeles Trade-Technical College. He has been swinging that same work ethic across Central California for over two decades, and his crew has logged plenty of hours on projects from Tower District bungalows to commercial build-outs along Shaw Avenue. When we open a CGI cabinet that is pulling away from the wall, we check the studs behind the drywall before we touch the box. That is the difference between a fix that holds and a callback in six months. Our written pricing covers the scope we see, and the 365-Day Done Right Promise covers the work after we leave. If a CGI repair fails inside that year, we come back and correct it at no charge. The estimate says what we build, and we build what the estimate says.
Styles & brands we work with
Common CGI Construction Problems We Fix in Fresno
Here is what we actually see on CGI jobs around Fresno, not what a brochure lists.
- Delaminated TFL edges around sink bases. CGI TFL cabinet boxes hold up well in dry conditions, but the bottom edge of a sink base cabinet takes abuse. A slow supply-line leak, a dishwasher that vents steam into the cabinet cavity, or even standing water from a dripped sponge will wick into the exposed particleboard edge. The TFL sheet starts lifting, the core swells, and the bottom shelf loses its rigidity. We catch this early on homes throughout Fresno’s older neighborhoods, where original plumbing from the 1970s and 1980s is more likely to develop slow drips.
- Fenix NTM surfaces showing ghost fingerprints and micro-scratches. Fenix NTM is marketed for its fingerprint resistance, and it generally delivers. But aggressive cleaners, particularly abrasive creams and solvent-based degreasers, will haze the surface over time. Once that matte finish dulls, it holds oils differently and starts showing every hand print. We have corrected dozens of these in Fresno kitchens by refinishing the surface with the manufacturer-specified process rather than replacing the door. Replacing the door is the expensive answer and rarely necessary.
- Solid surface seams opening at cooktop cutouts. CGI solid surface countertops are acrylic or polyester blends, and they expand under heat. A gas cooktop cycling between hot and cold will stress the seam at the cutout corner. If the original fabricator did not leave proper clearance or support blocking under the seam, that corner will open. We see it in Fresno homes with older CGI tops, especially around built-in gas ranges that run hard through the summer heat. The fix is seam reinforcement and added blocking underneath, not a full top replacement.
- Wall-hung CGI cabinet boxes pulling away from drywall. CGI wall cabinets need to anchor into studs or into proper toggle anchors rated for the load. We have opened up walls in Fresno kitchens and found original installers drove drywall screws into open cavity or used plastic expansion anchors on a 90-pound upper box loaded with stoneware. The cabinet slowly pulls forward, the gap opens at the top, and the doors start to bind. Correction means re-mounting into studs, adding a French cleat or steel rail, and resetting the doors.
- Standing seam metal roof panel leaks at fasteners and flashing. CGI standing seam panels, both the 16-inch and 18-inch profiles, are solid product. Most leak calls we run in Fresno are not panel failures. They are failed flashing at penetrations, vent pipes, or valleys, or fasteners that backed out over years of thermal cycling. Fresno’s summer roof surface temperatures exceed 150°F, and that expansion and contraction works fasteners loose. We replace the damaged flashing and re-secure the seam before the leak becomes a decking problem.
CGI Parts & Our Repair-vs-Replace Approach
We default to OEM CGI components when color matching matters. If a Fenix door or TFL edge banding needs replacement, we order the factory-matched piece from the CGI supply chain so the new panel reads identical to its neighbors. That is not always fast, but it is correct. For hardware, we are less precious. Drawer guides, hinges, and cabinet connectors are commodity items in most CGI builds, and we stock aftermarket equivalents from Blum, Salice, and Grass that meet or exceed the original spec at lower cost. No reason to pay a brand markup for a hinge that does the same job.
Repair versus replace is a judgment call we make honestly. If the cabinet core is dry, square, and structurally sound, we repair it. A delaminated TFL bottom panel gets cut out and replaced with new color-matched TFL, plus a moisture barrier where the leak occurred. That is a $400 fix, not a $4,000 cabinet replacement. We replace the box when the particleboard has soaked through to the point that the cabinet no longer holds its shape or the fasteners will not bite. Same logic on solid surface: we reinforce seams and repair cracks when the core is sound. We replace the top when cracking is widespread or the substrate under the laminate is compromised. Call (559) 785-2712 and we will tell you which one you have.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet, countertop, or roof panel in place. For a CGI cabinet issue, that means checking the box for square, pulling the drawers to look at the guides, probing the edges for delamination, and checking the wall attachment. For a roof call, we get on the roof and walk the seams and flashing. We write down what we find, and we show you the problem before we talk about fixing it.
- 2
Written price. You get a line-item price in writing before any work starts. The scope names the exact panels, hardware, and materials, whether OEM CGI or aftermarket. No numbers that move at the door. That is the Garrison Standard, and it applies to every CGI job we touch.
- 3
Repair or install. We execute the work with background-checked, uniformed technicians. For cabinet repairs, that means pulling the box, cutting out damaged panels, re-bonding TFL or Fenix surfaces, and reinstalling with proper anchoring. For solid surface, we clean the seam, re-bond, add blocking, and re-polish the repair area to match the surrounding sheen. For metal roofs, we replace flashing, re-secure seams, and match panel profile and color.
- 4
Test. A cabinet repair gets a full function check: doors open and close on plane, drawers slide without binding, the box sits tight against the wall. A solid surface seam gets checked with a straightedge after cure. A roof repair gets water-tested at the repair point before we climb down.
- 5
Warranty. Every completed job gets a written guarantee in your hand before we leave. The 365-Day Done Right Promise covers the work for a full year. If it fails inside that window, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Fresno
We work across the CGI product lines most common in Fresno homes. Our crew handles CGI Fenix NTM cabinet doors and drawer fronts, including color-matched replacement of individual panels. We also service and install CGI TFL cabinet boxes and panels, CGI solid surface countertops in the acrylic and polyester blend lines, and CGI standing seam metal roof panels in both the 16-inch and 18-inch profiles. For kitchen remodels and cabinet refacing jobs, we can supply new CGI components and integrate them with existing cabinets. When we do a roof repair, we match the existing CGI panel profile and color so patches do not read as patches.
We Also Service These Brands
CGI is one maker we know well, but not the only one. Bradford Remodeling Co Fresno installs and services KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures alongside CGI product, all backed by the same written price and the same 365-Day Done Right Promise. If your kitchen or roof mixes brands, we handle that without blinking.
FAQs – CGI Construction Service in Fresno
No. We are an independent General Contractor that services and installs CGI products in Fresno, but we have no manufacturer authorization from CGI and we will not imply otherwise. That independence actually works in your favor: we recommend what is right for your home, not what a brand rep tells us to push.
Yes, whenever color matching or structural integrity depends on it. For Fenix NTM doors and TFL edge banding, we order factory-matched CGI components so the repair disappears into the surrounding cabinetry. For hardware like hinges and drawer guides, we use quality aftermarket equivalents from Blum, Salice, and Grass that meet or exceed original specs. We will tell you which we are using and why, in writing, before work begins.
Most CGI cabinet panel repairs and solid surface seam reinforcements are done in one visit, typically four to eight hours depending on access and cure times. A metal roof flashing repair or seam re-secure is usually a half-day job. Full kitchen remodels involving CGI cabinet refacing or countertop installation run longer, commonly one to three weeks. We give you a written schedule with your written price, and we hold to it. Call (559) 785-2712 for a timeframe on your specific job.
Our crew services CGI Fenix NTM cabinet doors and drawer fronts, CGI TFL cabinet boxes and panels, CGI solid surface countertops in acrylic and polyester blends, and CGI standing seam metal roof panels in 16-inch and 18-inch profiles. If you have an older or less common CGI line in a Fresno home, call us and we will identify it from photos or an in-person visit.
If your CGI product is still under manufacturer warranty, any service performed by a third party can complicate a claim. We will tell you upfront if your product is still in warranty and whether a manufacturer claim is the better route. If the warranty has lapsed, which is the case for most CGI product we see in Fresno, then warranty concerns do not apply and we can proceed on day one.
CGI repairs in Fresno run a wide range depending on what failed. Here are our current line-item ranges for common CGI work:
| Service | Price Range |
|---|---|
| Kitchen Remodel with CGI cabinet refacing | $14,000 – $45,000 |
| Small Kitchen Remodel (CGI cabinets & solid surface top) | $9,000 – $20,000 |
| Cabinet Installation (CGI boxes and Fenix doors) | $4,000 – $13,000 |
| Countertop Installation (CGI solid surface) | $2,000 – $6,500 |
| Standing Seam Metal Roof (CGI panels) | $15,000 – $40,000 |
| Tile Roof Repair / Roof Repair including CGI flashing | $600 – $2,500 |
Repairs to individual cabinet panels, seams, or flashing are typically on the lower end of those ranges. Call (559) 785-2712 for an exact quote, estimates are free.
Yes, in most cases we can. When CGI has discontinued a specific Fenix or TFL color, we work with local finishing suppliers to custom-match the surface using a spectrophotometer reading taken from an undamaged door on your existing cabinets. The match is not always perfect under every light source, but on a door-by-door basis it typically disappears. We show you a sample panel for approval before we fabricate. Call (559) 785-2712 to schedule a color match.
That crack is almost always heat cycling combined with insufficient support. CGI solid surface expands as it heats, and the corner of a cooktop cutout is the highest stress point on the top. If the original installer did not add blocking under the seam or left the cutout tight against the range, the material eventually cracks at that corner. We fix it by routing out the crack, re-bonding the seam with a color-matched adhesive, and adding structural blocking underneath so it does not reopen. If the crack has spread into the field of the top, replacement may be the honest recommendation. Get us a photo or call (559) 785-2712 and we will tell you which path applies.
Yes. The 16-inch and 18-inch standing seam profiles are still in production, and we can source replacement panels for most older CGI roofs through current supply channels. When the original color has faded from Fresno sun, we color-match the patch panel using a sample taken from an unexposed section, often under a ridge or behind flashing. The patch will weather to blend within a season. If a roof is too far gone for patch work, we will tell you that straight and quote a replacement.
No, not in most cases. If the damage is confined to the bottom shelf or the lower edge banding, we cut out the damaged panel, fabricate a new color-matched TFL panel, and reinstall it with a moisture barrier at the base. That typically runs in the hundreds, not thousands. We recommend full box replacement only when the particleboard core has absorbed enough water that the cabinet sides have swollen out of square or the fasteners will no longer hold. Call (559) 785-2712 for an in-person assessment and a written price either way.
Yes. Refacing keeps your existing CGI cabinet boxes in place and replaces the doors, drawer fronts, and edge banding with new Fenix NTM or matched TFL panels. It is the right call when the boxes are square and dry but the surfaces are worn, dated, or damaged. Refacing runs less than a full cabinet replacement and typically takes less than half the time on site. We will tell you honestly if your boxes are too far gone for refacing. Call (559) 785-2712 for a free estimate.
Book Your CGI Service in Fresno, CA
If you have a CGI cabinet that is delaminating, a solid surface seam that has opened, or a standing seam roof that is leaking in Fresno, call Bradford Remodeling Co Fresno at (559) 785-2712. You will get a live person on the phone, a straight answer about what you are looking at, and a written price before any work starts.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Fresno since 2008.
