Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in Selma, CA | Bradford Remodeling Co Fresno
Delta construction service in Selma is straightforward: we install, repair, and replace Delta faucets, shower valves, and tubs in homes across the city, and we stock the parts to do it fast. We’re an independent Delta service provider, not a manufacturer-authorized shop, which means we tell you straight whether a fixture is worth repairing or should be replaced. If you own a Selma home built between the 1950s and 1980s, chances are you’ve got a Delta shower valve or faucet that needs attention. Call (559) 785-2712 for a written estimate before any work starts.
Our crew has worked on more Delta fixtures in Selma than we can count. Ranch houses off Rose Avenue. Bungalows near the packing sheds. The older stock west of the railroad tracks. We know which Delta cartridges and valves hold up under Selma’s hard water and which ones were never built for it. Curtis Lane started with a framing hammer in Los Angeles and brought that same work ethic to Central California. His crew shows up on time, in uniform, and with a written price in hand. That’s how Bradford Remodeling Co Fresno operates as a Selma General Contractor across the city and surrounding valley.
Why Selma Residents Choose Us for Delta Service
Because we’re local to the trade, not a call center. We’ve been running Delta repair and remodel work in Selma since 2004 as part of the Garrison Partners family, and every job gets the same treatment: a written price before work begins, background-checked technicians on site, and the 365-Day Done Right Promise in writing. If the work fails inside a year, we come back and fix it at no charge.
What does that mean for your Delta fixture? It means we use genuine Delta RP cartridges, seats, springs, and trim, not whatever the supply house had on the shelf. It means we tell you when a valve body is too far gone to rebuild and should be replaced instead. And it means when a 1962 ranch on Wright Street has a Monitor 13 valve spiking hot and cold, we diagnose it right the first time rather than guessing at your expense.
A live person answers our phone 24 hours a day, seven days a week. No automated maze. You call, a human picks up, and we schedule the service call. That matters when your only shower is down and you live in Selma, where the next contractor might be 45 minutes away in Fresno.
Styles & brands we work with
Common Delta Construction Problems We Solve in Selma
- Hard-water crust on older Delta ball-type and cartridge faucets. Selma’s water comes out of the ground loaded with minerals. Over ten or fifteen years, that crust seizes up handles, clogs aerators, and causes drips at the spout. We replace seats and springs, clear the valve body, and get the fixture moving again without replacing the whole faucet.
- Delta Monitor 13/14 pressure-balance valves that won’t hold temperature. This is the classic 1970s-80s Selma ranch problem. Toilet flushes, washing machine cycles, and suddenly the shower goes cold or scalding. The pressure-balance cartridge is shot. We install a new genuine Delta cartridge and restore steady hot water, often without opening the tile wall.
- Delta Touch2O kitchen faucets that stop responding to touch. Selma summers run over 100°F, and many kitchens here don’t have air conditioning. That heat, combined with hard-water deposits, corrodes the solenoid in Touch2O faucets. Touch activation quits working. Sometimes a new solenoid fixes it; sometimes the whole faucet is due for replacement. We’ll tell you which.
- Cracked Delta enameled steel or fiberglass tubs in original bathroom builds. Homes from the 1920s to the 1980s often still have the original tub. Slab movement, age, and heavy use stress the fixture until hairline cracks appear around the drain or along the base. If the tub is failing, a tub-to-shower conversion with a new Delta pressure-balance valve is usually the better move.
- Worn drain assemblies on west-side Selma tubs. Older homes west of the railroad tracks sit on expansive clay that shifts with winter rain. The slab moves, the drain connection cracks, and water leaks into the crawlspace. We check the drainage path on every west-side Delta tub replacement because this failure shows up here more than anywhere else in the city.
Delta Service in Selma: What Local Conditions Mean for Your Equipment
Here’s the fact most contractors miss: Selma’s west-side homes, the ones built before the 1980s roughly, sit on expansive clay soils that swell in winter and shrink in summer. That movement transfers straight into the slab, and the slab transfers it into whatever is bolted to it. Original Delta bathtub drain assemblies crack at the connection point, leak into crawlspaces, and rot out subfloor before you ever see water on the bathroom floor. We’ve pulled tubs on streets like Wright and found the drain flange separated clean from the waste pipe, the crawlspace wet, and the homeowner completely unaware. That’s why we inspect the slab drainage path on every west-side Delta tub replacement. It’s not a step we skip to save an hour. It’s the step that keeps a new tub from failing the same way the old one did.
The east side has different issues. Newer subdivisions, slab-on-grade homes built tighter, but still the same Selma hard water. New Delta fixtures get the same mineral buildup, just faster in un-air-conditioned kitchens and bathrooms that hit 110°F in July. That’s why we stock genuine Delta cartridges and trim in our Fresno warehouse, so a Selma repair doesn’t wait on a parts shipment from Texas.
Delta Models & Products We Service in Selma
We work on the Delta lines commonly installed in Selma homes. Delta sales & service covers the full range, including Delta Monitor 13 and 14 Series pressure-balance shower valves, the Lahara, Windemere, and Porter bathroom faucet collections, Classic 400 tub/shower trim, and Trinsic and Dryden kitchen faucets with Touch2O technology. We also service older Delta ball-type faucets that predate the cartridge lines.
On parts, our stance doesn’t change: we use genuine Delta RP cartridges, seats, springs, and trim. Mixed-brand cartridges leak early and void whatever warranty you’d otherwise have. For a valve body older than 20 years, when the shower wall is already open for a full remodel, we replace it rather than rebuild it. The wall is open, the labor is already there, and a new valve will outlast a rebuild by a decade.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in Selma
Here are the ranges we work within for Delta work in Selma. These are the same numbers we give on the phone, and the written estimate matches them line by line.
| Service | Price Range |
|---|---|
| Full Bathroom Remodeling with Delta fixtures | $9,000 – $28,000 |
| Tub-to-Shower Conversion including Delta shower valve and trim | $3,500 – $10,000 |
| Walk-In Shower Installation with Delta pressure-balance valve | $4,500 – $12,000 |
What drives the number is scope: a straight tub-to-shower conversion costs less than a full bathroom gut with new drain lines and framing. Your free estimate includes the written line items, the Delta parts we’ll install, and the schedule. Call (559) 785-2712 to get that estimate on paper.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Delta Construction in Selma
Hard water builds mineral scale inside the valve body and on the cartridge, causing stiff handles, reduced flow, or a drip at the spout. Most of the time we can rebuild the faucet with new genuine Delta seats, springs, and a cartridge, which is far cheaper than replacing the whole fixture. If you’re seeing crust around the base or the handle won’t turn at all, call (559) 785-2712 and we’ll tell you what a repair would cost.
If the wall is open for Kitchen Remodeling - Selma or bath work, we replace the valve. A Delta valve from the 1960s is at least 50 years old, and even if it works today, the cartridge is obsolete and the valve body has decades of hard-water wear. New Delta pressure-balance valves run about the same as a rebuilt antique and will hold temperature properly. We’ll show you the difference on paper before we cut anything.
Yes. Most tub-to-shower conversions in Selma keep the original drain location and water supply lines, which keeps the cost down and the schedule tight. We install a new Delta pressure-balance valve at the existing wet wall, then build the shower pan and surround to fit. We’ll check the slab drainage path while the tub is out, especially on west-side homes. For an exact price on your bathroom, call (559) 785-2712.
Selma summer heat and hard water corrode the solenoid that controls Touch2O touch activation. When the kitchen is un-air-conditioned and pushing 100°F or better, the solenoid fails faster. Whether it’s worth repairing depends on the faucet’s age. A ten-year-old faucet with a dead solenoid is usually a replace, not a repair. A newer faucet may just need a solenoid swap. We’ll give you the straight answer, not the answer that sells more parts.
We keep common Delta cartridges like the RP19804 and RP32104, plus seats, springs, and trim kits, on the shelf in Fresno. That means most Selma repairs don’t wait on parts. If your specific cartridge isn’t in stock, we can usually have it within one to two days. Call (559) 785-2712 and we’ll check availability while you’re on the phone.
Service Areas Near Selma
We serve Selma and the surrounding communities: Selma service area is our home base for this work. We also run Delta service calls in Delta service in Fresno, Delta service in Madera, plus Fowler, Kerman, and Dinuba. If you’re within 30 minutes of Selma, we can get a crew to you.
Book Your Delta Service in Selma Today
We replaced a corroded Delta Monitor 13 shower valve in a 1962 ranch on Wright Street after the homeowner showed us the temperature jumping from lukewarm to scalding whenever the washing machine cycled. Our tech pulled the old cartridge, cleared a quarter-inch of hard-water scale from the valve body, and installed a new genuine Delta RP19804 cartridge plus new trim. No tile wall opened, hot water steady again. That’s the standard. The estimate says what we build, and we build what the estimate says.
Call (559) 785-2712 for a free estimate on Delta service in Selma. Curtis Lane and the Bradford Remodeling Co Fresno crew will put the price in writing before we touch a fixture.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Selma since 2004.
