Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Selma, CA | Bradford Remodeling Co Fresno
We provide independent Ameristar construction service across Selma, from the older ranch homes near Rose Avenue to the newer subdivisions east of Highway 99. Bradford Remodeling Co Fresno is not a factory-authorized Ameristar dealer and we don’t claim to be. What we are is a local crew that pulls Ameristar-linked duct runs, insulation retrofits, and exterior envelope details out of Selma’s aging attics every week, and we know exactly how this valley’s heat and dust work against them. If you’re chasing an Ameristar cooling or duct problem in Selma, call (559) 785-2712 for a straight diagnosis and a written price.
Why Selma Residents Choose Us for Ameristar Service
Selma is a small city with a big July. When the temperature climbs past 100°F and your Ameristar system gives out, you don’t want a dispatcher in Fresno who’s never seen your street. Curtis Lane, the owner here at Bradford Remodeling Co Fresno, grew up learning framing and rough-in work from his uncle in Los Angeles before putting in years across Central California. He’s been under enough Selma crawlspaces to know that a 1960s ranch on a pier foundation behaves differently than a 2010s stucco box. That matters when we’re chasing airflow problems or planning Kitchen Remodeling in Selma that has to tie into existing Ameristar ductwork. We answer the phone with a live person, we show up in uniform, and we put the number on paper before any work starts. That’s The Garrison Standard, and it applies whether the job is a $400 roof repair or a $45,000 kitchen.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Selma
These are the failures we see most often on Ameristar systems in Selma, and they usually have a local cause behind them:
- Cracked or collapsed flex duct in attics over 130°F. Selma summers bake attic spaces well past the rating on cheap flex duct. When that duct separates or crushes, rooms at the end of the run go hot while the blower works fine. We replace the run and seal the connections so the air actually lands where it’s supposed to.
- Failed run capacitors on M4AC3 condensers. Repeated 100°+ cycles through June, July, and August beat on capacitors until they hard-start or quit. The fix is usually a quality aftermarket capacitor that matches or exceeds factory spec, installed with the right microfarad rating instead of whatever is on the truck.
- Corroded condensate lines and pan leaks on horizontal M4AH4 air handlers. Selma’s agricultural dust mixes with winter rain and eats at galvanized drain pans. We see this pattern constantly on older homes west of the railroad tracks. A new pan and a properly sloped drain line stop the ceiling stain before it starts.
- Sagging or rodent-damaged insulation around Ameristar ductwork. Older west-of-tracks attics are dry, dusty, and inviting to rodents. When insulation falls away from a duct run, that duct sweats in summer and bleeds heat in winter. We re-wrap and re-seal it.
- Tie-in problems when Ameristar equipment meets remodels. A kitchen or bath remodel that doesn’t account for existing duct chases, soffits, or air handler clearances can choke an Ameristar system that worked fine before the drywall came down. We plan the rough-in around the equipment, not the other way around.
Ameristar Service in Selma: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Ameristar page. Selma’s older neighborhoods west of the railroad tracks, including the blocks around Rose Avenue and Stillman Street, have a high concentration of 1950s tract homes built with shallow soffits and minimal attic ventilation. A shallow soffit means less room for return air and less space to run ductwork properly. Minimal ventilation means attic temperatures spike harder and stay hot longer than in newer east-side subdivisions with ridge vents and deeper overhangs. Put an Ameristar M4AH4 air handler or a long flex run in that kind of attic, and it’s working uphill from the day it was installed. We’ve pulled duct runs out of those houses that looked like accordions, heat-baked and sunken. If you own a home in that part of Selma, expect your Ameristar equipment to fail sooner from heat than the same unit would in a newer subdivision. Our crew was called to a 1962 ranch on Rose Avenue after the homeowner complained of weak airflow and a hot front bedroom. We found the M4AH4 air handler in a low crawlspace with a corroded condensate pan and separated flex duct from years of 105° afternoons. We replaced the duct run, sealed the plenum, and added a secondary overflow switch. The system cools evenly again in Selma’s July heat.
Ameristar Models & Products We Service in Selma
We work on the Ameristar equipment that actually shows up in Selma homes, not just the newest line on the brochure. That includes the M4AC3 air conditioner paired with older forced-air homes, the M4HP4 heat pump common in 1970s ranch retrofits, the M4GC2 gas furnace found in many Selma houses built before 1980, and the M4AH4 air handler tucked into closets and crawlspaces of older bungalows. On parts, our approach is simple. We use OEM Ameristar parts when warranty coverage or an exact factory fit matters. On older out-of-warranty systems, we often recommend quality aftermarket capacitors, contactors, and duct boards that match or exceed factory spec at a lower cost. We repair when the cabinet and blower are sound. We recommend full replacement when the heat exchanger is cracked or the compressor is failing, because throwing money into an aging unit doesn’t make financial sense for any Selma homeowner.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Selma
Most Ameristar-related construction work in Selma lands inside these ranges. Roof replacement runs $8,000 to $20,000 depending on roof size and tear-off, while tile roof repair sits at $600 to $2,500. A kitchen remodel typically ranges from $14,000 to $45,000, and a bathroom remodel from $9,000 to $28,000. These are the real numbers we quote from, not placeholders. What drives the final price is access, condition of the substrate, and whether the existing Ameristar ductwork or equipment needs to be tied in or worked around. Every free estimate includes a written line-item scope, so you know the number before we start and it doesn’t move at the door.
| Service | Selma Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Tile Roof Repair | $600 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Call (559) 785-2712 to get a written estimate for your Selma project. The estimate says what we build, and we build what the estimate says.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Selma
August in Selma pushes attic temps past 130°F, and if your Ameristar duct runs are in a shallow-soffit attic or the condenser is already heat-soaked, the system physically cannot reject enough heat fast enough. Weak airflow from collapsed flex duct or a dirty coil makes it worse. Call (559) 785-2712 and we’ll check the duct integrity, airflow, and condenser condition before recommending anything. Estimates are free.
Yes, and we do this often in Selma. If your M4AH4 air handler has a corroded pan or a failing blower but the condenser and line set are sound, replacing only the air handler can save thousands. We use OEM Ameristar parts when warranty coverage applies, and quality aftermarket options for older units. Call (559) 785-2712 for an exact quote after we inspect your setup.
Yes, that’s normal. Selma’s dry summers coat the heat exchanger and duct interiors with a fine layer of dust, and the first fall cycle burns it off. The smell should clear within a few hours. If it persists, it could be a dirty filter or worse, so call (559) 785-2712 and our crew will take a look.
At 15 years old, an Ameristar system in Selma is near the end of its practical life, especially if it’s been running through our summers. If the repair is a capacitor or contactor, fix it and keep going. If it’s a cracked heat exchanger or failing compressor, replacement usually makes more sense than paying a third or half the cost of a new system into an old one. Call (559) 785-2712 for a straight recommendation without the sales pressure.
We do. Our crews handle our General Contractor in Selma services and whole-home remodeling, including ADU builds, and we can spec and install Ameristar equipment sized correctly for Selma’s summer load. Every ADU project gets a written price before work starts and the 365-Day Done Right Promise after it’s done. Call (559) 785-2712 to talk through your ADU plans.
Service Areas Near Selma
We serve Selma and the surrounding Central Valley, including Selma service area coverage, Ameristar service in Fresno, Ameristar service in Madera, plus Kerman, Fowler, and Dinuba. If you’re anywhere in the corridor, reach out and we’ll confirm the schedule. For broader Ameristar work, you can also review our Ameristar sales & service page.
Book Your Ameristar Service in Selma Today
If your Ameristar system or the construction around it is giving you trouble in Selma, call (559) 785-2712. We’ll put a written estimate in your hand, and if the work is done right, our 365-Day Done Right Promise backs it for a full year.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Selma since 2004.
