A Bradford company - serving Fresno, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Wellborn Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fresno
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A finished basement family room with a media wall and wet bar
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Wellborn Fence Installation: The Fresno Owner’s Guide

Wellborn fence installation in Fresno typically runs $3,500 to $9,000 for a complete run, including materials, post setting, and labor. Most jobs we schedule take two to three days on site, depending on linear footage, gate count, and what we find once we start digging. You usually discover the problem the same way every Fresno homeowner does: a post leaning after the winter rains, a gate dragging on the concrete, or pickets popping loose at the nail lines because the sun cooked the original fasteners. If you’re down a fence section and staring at a Wellborn product that failed, this page tells you what it costs, what causes it, and what a correct replacement looks like.

Two construction workers installing upper cabinets during a kitchen remodel nationwide

Call (559) 785-2712

Here’s the straight read: Wellborn is known for cabinetry, not fencing. If you have a Wellborn-branded fence product or a contractor installed Wellborn-compatible materials, we treat it the same way we treat any job. We identify what you have, match the material or upgrade it, and price it in writing before anyone swings a hammer. Bradford Remodeling Co Fresno is an independent service provider and not affiliated with Wellborn, so there’s no brand politics in our recommendation. We fix what you have or replace it with something that holds up to Fresno sun and soil. Either way, you get a written price and a one-year guarantee on the work.

  • Installed price in Fresno: $3,500 to $9,000 for a typical fence run.
  • What drives cost: linear feet, post depth, gate hardware, material choice, and access.
  • Timeline: Most fence replacements take two to three days on site.
  • Guarantee: Our 365-Day Done Right Promise covers the entire install in writing.
  • First step: Call (559) 785-2712 for a free estimate.

Which Wellborn Models This Applies To

An open kitchen and dining area after a remodel

Let’s be clear about the Wellborn name here. Wellborn Cabinet, Inc. manufactures cabinetry out of Ashland, Alabama. They don’t make fencing. What we see in Fresno are two situations: either a homeowner has a fence built from salvaged or repurposed Wellborn cabinet stock (uncommon, but it happens with builders doing creative side work), or a contractor marketed a “Wellborn-style” fence without using Wellborn product at all. If you have actual Wellborn-branded material in your fence, you’re likely looking at repurposed interior-grade wood, which was never engineered for ground contact or Central Valley UV exposure.

Here’s the compatibility gotcha that matters: interior cabinet wood carries no exterior treatment rating. If someone built you a Wellborn-board fence, it’s failing faster than standard redwood or pressure-treated pine would. That means the decision tree is simple. If the material is sound, we can reinforce the structure and replace hardware. If it’s checked, cupped, or rotting at grade, replacement with proper exterior material is the honest call. We carry redwood and pressure-treated Doug fir on the truck, and we can quote cedar or composite with a material order ahead of the job. You won’t get a Wellborn fence part number from us because there isn’t one. You’ll get a straight answer about what’s actually in the ground and what it will take to make it right.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Wellborn Fence Installation Is Failing

Whether the original install used Wellborn cabinet stock or a knockoff that borrowed the name, the failure signs show up the same way in Fresno. We see these five most often:

  • Posts leaning at the gate line. Fresno’s clay soil expands and contracts with moisture. Shallow posts set in two feet of clay shift within a season or two. The gate is always first because it carries live weight.
  • Pickets splitting at the nail heads. Interior-grade wood swells faster than exterior material when it takes on water. Add Fresno’s 100-degree afternoons and the boards split right where the fastener bit in.
  • Gate dragging or binding. When a post shifts even a half inch out of plumb, the gate hardware loses its geometry. The latch stops lining up, the hinge binds, and the whole frame torques.
  • Rot at the bottom rail. This is the classic tell for cabinet stock repurposed as fence board. Interior wood has no ground-contact rating. Moisture wicks up from the soil line and the bottom rail crumbles first.
  • Fastener rust streaks bleeding down the face. Interior cabinet fasteners are often interior-rated, which means bright steel instead of hot-dipped galvanized or coated deck screws. When they corrode in the Fresno elements, the streaks show up fast.

None of these is a cosmetic issue. Each one is a structural failure in progress, and ignoring it typically means the fix doubles in scope. A post that’s leaning today is a section that’s on the ground after the next heavy rain.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled kitchen with a waterfall island and wood cabinets

In Fresno, a Wellborn-related fence replacement runs $3,500 to $9,000 installed. That’s a real number, and here’s what’s inside it. At the low end, you’re looking at a shorter run, a single walk gate, and post replacement only. At the high end, you’re in full replacement territory: new posts every six to eight feet, new rails, new pickets, two gates with quality hardware, and haul-off of the old material.

Scope Typical Fresno Price
Post replacement only (up to 6 posts) $3,500 – $5,500
Partial fence replacement with gate rebuild $5,000 – $7,500
Full fence replacement, two gates, new hardware $7,000 – $9,000

What drives the range? Linear footage is the big one. Post depth matters because Fresno clay requires a deep set with crushed rock backfill, not just concrete. Gate count and hardware add up fast. And if the old footing concrete needs jackhammering out, labor climbs. Every Bradford Remodeling Co Fresno estimate spits out a fixed price. No numbers that move at the door. The work is covered by the 365-Day Done Right Promise, which means if anything we built doesn’t hold within a year, we come back and fix it at no charge.

DIY or Call Us?

You can check a few things before you spend a dollar. Walk the fence line and look for visible post lean. Grab the gate at the latch corner and lift, feeling for sag. Note where the wood is touching soil directly. Those observations help you describe the problem when you call, and they help us quote accurately over the phone. That’s the owner’s job: knowing what’s wrong before someone shows up.

What you shouldn’t do is dig out and reset posts on a fence that’s holding weight, or try to true up a gate frame with shims and longer screws. A gate under tension can kick back when hardware lets go, and a post that’s holding a whole section of fence is not the thing to learn on. We’ve rebuilt plenty of fences where a well-meaning weekend cost the homeowner double because the section collapsed halfway through. It’s not about protecting the trade. It’s about the physics of a loaded structure. Call (559) 785-2712, describe what you’re seeing, and let us put the number in writing before anyone starts work. The estimate says what we build, and we build what the estimate says.

FAQs

Installers leveling a new base cabinet during a kitchen remodel

Getting started with Bradford in Fresno

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Fresno team

A local crew that works across Fresno and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Fresno? Licensed & insured · Free in-home estimates response · free estimates
Call (559) 785-2712
Local Service Coverage

Request a Free Estimate in Fresno

Tell us what you need - Bradford Remodeling Co Fresno responds fast. No obligation.

By sending this request, you agree to the terms of our Privacy Policy and consent to being contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch