Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Fresno Owner’s Guide
If your CertainTeed paver driveway is heaving, cracking, or the edging has let go after a Fresno summer, we stock the compatible replacement pavers, edge restraints, and base materials to correct it. Installed replacement work on a CertainTeed paver driveway in Fresno typically runs $7,000 – $18,000 depending on square footage, base repair, and the specific paver line you’re matching. We carry OEM-spec CertainTeed pavers plus quality aftermarket equivalents that match the color and dimension of your existing installation, and we can usually have your paver job quoted within one visit.
Most Fresno owners discover a paver problem the same way: a low spot appears after February rain, one edge starts drifting toward the lawn, or a paver cracks under the garbage bin after ten years of Fresno sun. The good news is that paver driveways are sectional by design. You rarely have to replace the entire field. The bad news is that a failed base or a bad edge restraint will keep undoing whatever patch you put on top.
Which CertainTeed Models This Applies To
CertainTeed’s hardscape line for residential driveways and walkways includes their CenturyStone and TerraPave paver families, along with coordinating edge restraints and polymeric joint sand. CenturyStone runs thicker, typically 60mm or 80mm, and is rated for vehicular loads when set on a proper base. TerraPave is thinner, usually 50mm, and is meant for patios and walkways, though we see it used on driveways in Fresno more often than we’d like. That’s a compatibility gotcha worth knowing: if a previous installer laid 50mm pavers on a driveway, failure happens years earlier than it should, and the fix often means stepping up to an 80mm paver rather than matching what’s there.
To identify what you have, look at the bottom of a lifted paver. CertainTeed imprints the product name and thickness in the mold. If the imprint is worn off, measure the paver’s thickness with a tape. We’ll also match the chamfer profile (the bevel on the top edge) and the color blend, which matters more in Fresno than most places because our sun bleaches older pavers unevenly. Bradford Remodeling Co Fresno is an independent service provider, not affiliated with CertainTeed, and we stock both OEM CertainTeed pavers and aftermarket units from Belgard and Unilock that we can color-match to an existing field.
Styles & brands we work with
Signs Your CertainTeed Driveway & Pavers Is Failing
- Edge pavers drifting outward, especially along the driveway’s outside curve. The original edge restraint has failed or was never installed. CertainTeed installations depend on a rigid plastic or aluminum edge to hold the field in tension. Once it lets go, the perimeter pavers spread and the center begins to sag.
- Low spots that hold water for hours after a Fresno rain. This usually points to base settlement, not bad pavers. In our clay-heavy Central Valley soil, an uncompacted or under-built base will settle in sections after a couple of wet winters, and no amount of re-sanding the joints will fix it.
- Pavers cracking along a path where the garbage bin or a parked truck sits. This is a thickness problem. 50mm pavers under repeated wheel loads will crack, particularly in Fresno’s heat where thermal expansion increases joint pressure. The fix is replacing the cracked units with 80mm pavers over the load path.
- Joint sand washing out or blowing away, leaving gaps that widen each season. If the joints were filled with plain sand instead of polymeric sand, the fines wash through and the joints open up. Open joints let pavers shift independently, and the damage accelerates.
- White, chalky patches appearing on paver surfaces. That’s efflorescence plus UV bleaching, common on certain CertainTeed color blends after a decade in the Central Valley sun. It’s cosmetic, not structural, but if you’re re-setting a section anyway, it’s the time to address it.
Replacement Cost & What’s Included
For a full paver driveway replacement in Fresno, expect $7,000 – $18,000 installed. On the lower end, that’s a standard two-car driveway with the existing base re-compacted and re-used, new edge restraints, and matched pavers. On the higher end, that’s a full tear-out of a failed base, new aggregate base at 4 – 6 inches compacted in lifts, new bedding sand, wider or longer layout, and premium paver units including a border course.
The biggest cost drivers are base repair and access. If we’re pulling 6 inches of failed base out of a backyard-adjacent driveway in the Tower District, dump fees and hand-loading add real money. If the existing base is solid and we’re just re-leveling, topping with fresh bedding sand, and re-laying the field, you’ll sit near the bottom of the range. Every Bradford Remodeling Co Fresno paver quote includes the written line-item price before work starts, so there’s no number that moves once we begin. All work carries the 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely lift a single cracked paver with a flat pry bar, check the thickness stamp on the bottom, and measure whether the surrounding pavers have drifted. That’s useful information when you call us, and it helps us stage the right materials. But re-setting a section of driveway is where it goes sideways for most homeowners: if you don’t re-compact the base in lifts, or you lay pavers on an uneven bed of sand, you’ll have a new low spot by next spring. Paver work isn’t dangerous like a garage spring or a live panel, but it’s heavy, dusty, and unforgiving of shortcuts. Curtis Lane has torn out enough “I did it last year” paver patches in Fresno to know the difference between a re-set that holds and one that doesn’t. If you’re unsure, call us at (559) 785-2712 and we’ll tell you straight what the job needs.
FAQs
A properly installed CertainTeed paver driveway on a compacted base should hold its structure for 25 to 30 years in Fresno’s climate, with re-sanding of the joints every 3 to 5 years being the only routine upkeep. The paver units themselves won’t fail; what fails first is the base, the edge restraint, or the joint sand. If any of those three were skipped or undersized at install, expect problems inside the first five years. Call (559) 785-2712 and we’ll inspect yours before recommending a full replacement, because a partial re-set is often all it needs.
Most cracked or shifted sections can be repaired without replacing the whole driveway. We lift the affected area, correct whichever layer failed (base, sand, or edge), re-compact, and re-lay the pavers with fresh polymeric sand in the joints. A full replacement only makes sense when the base has failed across the majority of the field or when the original pavers are a thickness that should never have been used for a driveway. Call (559) 785-2712 for a written quote, and we’ll tell you which one you’re actually facing.
A section repair typically takes one to two days on site, including base work, re-setting, and joint sand. A full driveway replacement runs three to five days depending on square footage and how much old base has to be hauled off. We schedule the work in writing, and we tell you up front which days we’ll be on your property, so you’re not wondering where the crew is. Call (559) 785-2712 to schedule a free estimate and get a written timeline.
We stock CertainTeed CenturyStone and TerraPave pavers in the most common Fresno color blends, plus edge restraints, bedding sand, and polymeric joint sand on our trucks. If your specific color or profile isn’t on hand, we source it through our supplier network the same week. We also stock Belgard and Unilock pavers as color-matched aftermarket equivalents when an OEM match isn’t available or the product line has been discontinued. Call (559) 785-2712 and we’ll confirm what’s available for your specific project.
Get a Written Price for Your CertainTeed Paver Work in Fresno
If your driveway is heaving, spreading, or cracking, we’ll come out, look at the base, check the paver thickness, and give you a written price that covers the entire scope. No numbers that move at the door. No patch job that fails next winter. The estimate says what we build, and we build what the estimate says. Call (559) 785-2712 to schedule your free estimate, or reach out and Curtis Lane will walk your project personally.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fresno at Bradford Remodeling Co Fresno, serving Fresno and nearby areas.
