Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Fresno Owner’s Guide
If you own a home in Fresno with ES Windows products and your bathroom needs work around or involving those windows, an ES Windows-compatible bathroom remodel typically runs $9,000 to $28,000 installed, depending on window count, framing condition, and finish level. We stock and install compatible trim kits, sills, and flashing on our trucks for most ES Windows bathroom applications, and we can usually start within a week of your written estimate. Most Fresno homeowners discover they need us after a window leaks into the shower surround, or the interior sill has rotted from condensation, or a remodel bid fell apart because the contractor didn’t know how to properly flash an ES Windows frame against tile.
We’re Bradford Remodeling Co Fresno, an independent remodeling contractor. We are not affiliated with ES Windows, but we work with their products every week, and we know exactly how their frames, sills, and glazing behave in Central California heat and hard water conditions.
Which ES Windows Models This Applies To
ES Windows builds aluminum-frame windows in several series that show up in Fresno bathrooms: the ES-100 single-hung, the ES-200 horizontal slider, and the ES-400 awning and casement line. The compatibility gotcha most homeowners run into is the frame depth. ES Windows bathroom units are typically 3-1/4 inch or 4-1/2 inch frame depth, and the tile backer board, waterproofing, and finish tile have to be planned around that number. If your remodeler orders the wrong depth or tries to fur out the wall on the fly, the window ends up recessed too far, the sill collects water, and the grout line cracks inside a year.
You can identify your ES Windows model from the label etched on the inside of the bottom rail of the sash or on the frame’s head. The label lists the series, the glass package, and the manufacturing date. If the label is gone, measure the visible frame width from the interior drywall face to the exterior stucco or siding face. That measurement tells us the frame depth, and from there we can match the right sill, trim, and flashing kit. For most Fresno homes, OEM ES Windows parts are the right call when the window itself is staying and we’re rebuilding around it. If the window is being replaced as part of the remodel, we’ll price both OEM and quality aftermarket equivalents, and we’ll tell you honestly which one holds up better for your specific exposure.
Styles & brands we work with
Signs Your ES Windows Bathroom Remodeling Is Failing
- Water staining on the drywall or window stool after every shower. The window’s weep holes are clogged or the flashing was never lapped correctly over the waterproofing membrane. Water is getting behind the tile and into the substrate, and in a Fresno bathroom that sees daily steam, the damage compounds fast.
- Grout cracking in a straight line under the window. The sill was installed without enough slope, or the backing material flexes when someone leans on it. Straight-line cracks mean movement, not normal settling, and the constant movement is trying to pull the window frame out of square.
- Black or green staining along the bottom corners of the window. That’s mold feeding on trapped moisture. In Fresno’s hot summers, a bathroom window with poor airflow and a failed seal turns into a greenhouse, and the mold gets into the drywall and the framing behind it.
- The window is hard to open or close after the remodel. The rough opening shifted or the new tile and backer board were installed tight against the frame, pinching it. ES Windows aluminum frames don’t flex much, so a binding sash means the opening itself is out of square.
- Condensation on the inside of the glass between the panes. The insulated glass unit has lost its seal. That’s not a remodeling defect, it’s an age issue, but it’s exactly the kind of thing we catch during a bathroom remodel and handle at the same time instead of making you pay for a second trip later.
Replacement Cost & What’s Included
An ES Windows-compatible bathroom remodel in Fresno runs $9,000 to $28,000. The spread comes from three things: how many windows are in the bathroom, whether the existing window frames stay or get replaced, and what’s happening with the tile, waterproofing, and glass. A single-window bathroom with a standard alcove tub and the existing ES Windows frame staying put lands near the bottom of that range. A larger bathroom with two or three windows, a full walk-in shower, and replacement of the windows themselves pushes toward the top.
Here’s the structure, because we put it in writing every time:
- Window prep and waterproofing labor: $800 to $3,500 depending on window count and condition
- ES Windows-compatible trim, sill, and flashing kit: $300 to $1,200 per window
- Full window replacement (if needed): $1,800 to $4,500 per unit installed
- Tile, shower surround, and glass work: $4,000 to $14,000 depending on scope
- Demo, rough-in correction, and finish carpentry: $2,500 to $9,000 depending on what’s hidden behind the walls
Every Bradford Remodeling job carries the 365-Day Done Right Promise. If our work fails inside a year of completion, we come back and correct it at no charge. That’s in writing, on the estimate, before we start. No numbers move at the door.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check which ES Windows series you have, note where water is appearing, and take photos of any cracking or staining before you call. That helps us give you a more accurate range on the first conversation. What you should not do is pull trim, cut into tile, or attempt to remove the window yourself. ES Windows frames are set into the waterproofing system, and breaking that seal without knowing how the flashing was originally lapped turns a $9,000 remodel into a $28,000 repair. If there’s any chance the window is load-bearing or tied into stucco on the exterior, leave it alone and let a trained crew handle it.
Most of the bathrooms we remodel in Fresno have at least one window that was flashed wrong from the start. Homeowners try to caulk it, then they try to re-grout it, then they call us a year later with mold in the framing. Call (559) 785-2712 and we’ll give you a written price before any work starts.
FAQs
Properly flashed and installed ES Windows frames in Fresno bathrooms typically last 20 to 30 years before the insulated glass seals begin to fail, though the sill and flashing around them may need attention sooner if the room has poor ventilation. The window itself lasts, but the waterproofing around it rarely survives more than 15 years without inspection. Call (559) 785-2712 for an exact assessment and a free estimate.
Yes, if the frame is solid and the failure is limited to the flashing, sill, or insulated glass unit, a repair is often all that’s needed, and it typically runs $400 to $1,500 depending on what’s compromised. If the frame is corroded or the rough opening has water damage, replacement is the honest recommendation. We’ll show you the condition when we open the wall, and you’ll know the repair cost before we proceed.
A standard single-window bathroom remodel with the ES Windows frame staying in place typically takes 2 to 3 weeks from demo to final grout seal. If windows are being replaced or the substrate has to be rebuilt, plan for 3 to 5 weeks. We give you a written schedule with the estimate, and the 365-Day Done Right Promise covers the finished work.
We keep the most common ES Windows sill, trim, and flashing kits stocked on our trucks, plus the sealants rated for aluminum frames against tile and stucco. If your window needs a specific OEM part we don’t have on hand, we order it and schedule the work the same week it arrives. Tell us your model number when you call (559) 785-2712 and we’ll tell you what’s in stock before you even book the estimate.
Bradford Remodeling Co Fresno also works with KraftMaid, Cambria, and Silestone products, which means we can match your ES Windows bathroom remodel to your cabinet, countertop, and vanity choices without handing you off to another crew. Curtis Lane runs the jobs himself, and he’s spent over two decades squaring rough-ins and prepping substrates across Central California, from Tower District bungalows to the subdivisions north of Herndon. The estimate says what we build, and we build what the estimate says.
Get Your Written Estimate
Call (559) 785-2712 to schedule your free ES Windows bathroom remodeling estimate in Fresno. You’ll get a written price, a clear scope, and the 365-Day Done Right Promise in your hand before a single tool comes out.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fresno at Bradford Remodeling Co Fresno, serving Fresno and nearby areas.
