Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Selma, CA | Bradford Remodeling Co Fresno
We provide independent Kohler specialists construction and fixture service across Selma, from full bathroom remodels to tub-to-shower conversions in the older homes west of the railroad tracks. The thing that sets our Kohler work here apart is simple: we know how Selma’s hard well water and triple-digit summers beat up specific Kohler models, and we plan the repair or remodel around those local conditions instead of pretending they don’t exist. Call (559) 785-2712 for a free estimate on any Kohler job in Selma.
Why Selma Residents Choose Us for Kohler Service
Bradford Remodeling Co Fresno has been working with Kohler fixtures long enough to know which models hold up and which ones fight back. Curtis Lane, our owner, cut his teeth on the construction side before this company ever hung its first kitchen cabinet. His crew has pulled rust-stained Bellwether tubs out of 1950s ranch homes, rebuilt shower valves in Purist trim, and retrofitted Devonshire faucets into bathrooms where the plumbing predates the Eisenhower administration. We’re not factory-authorized, and we’ll tell you that straight. What we are is a local crew that knows Kohler’s real-world failure points in Selma’s specific housing stock. Homeowners here call us because we answer the phone, show up when we say we will, and put the price in writing before anything gets torn out.
Styles & brands we work with
Common Kohler Construction Problems We Solve in Selma
- Hard-water cartridge failure. Selma’s well water carries enough mineral content to calcify Kohler ceramic disc cartridges inside of two to three years. Purist and Devonshire faucets get stiff, then start dripping, then refuse to shut off entirely. We pull the cartridge, check the valve body for scoring, and install the right OEM or equivalent replacement.
- Cast iron tub rust and enamel chips. Original Bellwether tubs in the 1950s through 1970s ranch homes across Selma take a beating from summer heat expansion. Hairline cracks in the enamel let moisture reach the iron underneath, and once rust starts, it spreads under the surface. We assess whether the tub can be refinished or if a tub-to-shower conversion makes more sense.
- Toilet fill valve and flapper failure. High sediment in Selma water chews through Kohler fill valves and flappers faster than the manufacturer’s average. Homeowners hear ghost flushing or constant running. It’s usually a fifteen-minute parts swap, but if the toilet is over 20 years old with multiple failing components, we’ll say so and recommend replacement with a modern water-saving model.
- Brittle plastic trip levers and overflow covers. Selma gets over 100°F every summer, and that sun load cooks the plastic trim on older Kohler tubs. Trip levers snap off, overflow covers yellow and crack. We keep common replacements on the truck, so it’s rare this turns into a two-visit job.
- Failing tub surrounds behind tile. In homes built before modern waterproofing practices, cracked grout and missing caulk let Selma’s intermittent heavy winter rains and steamy shower cycles drive moisture into the substrate. By the time tiles start popping off, there’s often structural work needed underneath. We inspect the substrate before quoting any repair, so the price covers what’s actually wrong.
Kohler Service in Selma: What Local Conditions Mean for Your Equipment
Older neighborhoods west of the railroad tracks, around Rose Avenue and Arrants Street, are where we see Selma’s housing reality at its sharpest. Homes from the 1920s through the 1950s in that part of town still carry original cast iron plumbing and bathrooms that were built small, five feet by seven in a lot of cases. When a homeowner there wants a walk-in shower where a Kohler Bellwether tub used to sit, the job is rarely a simple swap. Floor joists under those tubs often need sistering before a modern shower base can go in, because the original framing wasn’t sized for the dead load of a tile shower with a glass surround. Drain lines are cast iron, not PVC, and the rough-in for a center-drain tub doesn’t match a standard offset shower drain. None of this is insurmountable. It’s just the difference between a crew that has actually done Kohler retrofits in Selma’s older homes and one that quotes from a chart. We plan for the framing work, the drain relocation, and the permit specifics on the Selma side of things, and that means the written price we give you is the price you pay.
Kohler Models & Products We Service in Selma
We work on Devonshire collection tubs, toilets, and faucets; Memoirs pedestal sinks and toilets; Purist faucets and shower trim; and Bellwether cast iron bathtubs. When a fixture is still in production, we use genuine Kohler OEM cartridges, seals, and trim to keep the finish matching. For older discontinued Kohler models, we’ll be honest about what’s available. Quality aftermarket equivalents from Danco or Fluidmaster often get the job done without a six-week lead time on a part Kohler stopped making a decade ago. If the fixture is past 20 years old and multiple components are failing, we’ll recommend replacement with a modern water-saving model instead of throwing repair money at a losing battle.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Selma
Here’s what Kohler work actually costs in the Selma market, with the understanding that every job gets a written line-item estimate before anything gets demolished.
| Service | Price Range |
|---|---|
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the cost is scope. A one-day cartridge swap runs at the low end. A full gut with framing repairs, drain relocation, and Kohler fixtures runs at the high end. Every free estimate includes a written scope of work and a fixed price. Call (559) 785-2712 to schedule yours.
Serving Selma, CA - Our Local Coverage Area
We’re a General Contractor - Selma based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Selma
In most cases, yes, but the surrounding tile typically needs to be removed at least two to three feet up from the tub line to properly waterproof the new shower walls. The bigger variable in older Selma homes is the framing underneath the tub. If the joists need sistering, the floor comes up in that section regardless of the tile. We’ll tell you exactly what’s involved before we write the estimate.
The handle is not the problem. The Purist uses a ceramic disc cartridge inside the valve body, and Selma’s hard water deposits calcium on the disc surfaces until they no longer seal. You need the cartridge replaced, and the valve body needs to be inspected for scoring while it’s out. That’s a straightforward repair. Call (559) 785-2712 and we’ll get it sorted.
We use genuine Kohler OEM cartridges, seals, and trim whenever the fixture model is still in production and the finish needs to match. For discontinued Kohler models, we use quality aftermarket equivalents like Danco or Fluidmaster, and we’ll tell you which one is going in before we install it. We’re independent, not factory-authorized, so we answer to you, not a manufacturer’s territory map.
A full Selma Kitchen Remodeling and bathroom remodel with Kohler fixtures in Selma typically runs $9,000 to $28,000 depending on the size of the room, the condition of the framing and plumbing, and whether you’re doing a tub-to-shower conversion or keeping a tub. Every project gets a written fixed price before work starts. Call (559) 785-2712 for a free, specific estimate.
Yes. A five-by-seven bath is tight, but we regularly convert the tub footprint to a walk-in shower with a low-profile base and clear glass panel instead of a full framed enclosure. That keeps sightlines open and makes the room read larger than it is. The catch in Selma’s older homes is the framing and drain work underneath, which we address in the estimate.
Service Areas Near Selma
In addition to Selma, our crews run Kohler service across Selma service area neighborhoods and the surrounding Central Valley. We’re in Fresno regularly, along with Kerman and Fowler to the west, and Dinuba to the southeast. If you’re just across the county line, check our Kohler service in Fresno page or the Kohler service in Madera page for details. If you’re not sure whether we cover your address, call and ask. We’ll give you a straight answer.
Book Your Kohler Service in Selma Today
If your Kohler fixtures are fighting back, call (559) 785-2712. We’ll schedule a free estimate, walk the job with you, and hand you a written price before anything gets torn out. That’s how we work. It’s the only way Curtis Lane has ever run a job site.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Selma and the greater Central Valley.
