Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Fresno Owner’s Guide
Bradford Remodeling Co Fresno installs and finishes KraftMaid cabinetry, trim, and interior build-out packages on home additions and ADUs across Fresno, with most full-scope projects landing between $45,000 and $130,000 for the addition itself. The KraftMaid component typically covers $4,000 to $13,000 of that number, depending on run footage, door profile, and finish grade. You’ll know you’re dealing with a KraftMaid-specific issue when doors bind against a new wall that’s 3/8″ out of square, or when the existing cabinet boxes won’t hold a screw because the substrate behind them is dry-rotted from a valley-run leak that’s been silently working for three summers.
Which KraftMaid Models This Applies To
KraftMaid runs three main cabinetry lines that show up in Fresno additions and ADUs: the standard all-plywood construction line, the Vantage series with full-extension soft-close drawers, and the lower-cost value line that big-box retailers sell. The compatibility issue that bites most owners is hinge boring. KraftMaid’s value line uses a 35mm cup boring with a specific reveal, while the Vantage line uses the same 35mm cup but a different hinge plate height. If your addition was framed and drywalled by one crew, then finished by another, and the cabinet doors now rub at the corner of the new wall, the problem is almost never the cabinet box. It’s the wall. Shimming a KraftMaid cabinet to a crooked wall without addressing the framing behind it will hold for about one season in Fresno’s dry heat before the face frame starts cracking at the fasteners.
Styles & brands we work with
Signs Your KraftMaid Home Additions & ADU Is Failing
- Doors that swing open on their own or won’t latently stay closed. This is almost always an out-of-plumb cabinet install against a wall that moved. Central Valley clay soil expands and contracts through the year, and a 16-foot wall run can easily shift a quarter inch between August and February.
- Drawer fronts chipping at the bottom edge. KraftMaid thermofoil and painted finishes fail fastest where humidity collects. In a Fresno ADU without proper attic ventilation, the interior humidity load in summer can exceed what the finish was specced for.
- Hinges bending or screws stripping out of the cabinet box. If the installer drove the hinge screws into the drywall instead of the cabinet’s mounting rail or a stud, you’ll see this within two years.
- Face frames pulling away from the wall at the top. This tells us the cabinet was hung on the drywall alone, not anchored through to the framing. It’s a tear-off-and-rehang job, not a screw-tightening job.
- Soft-close doors slamming. KraftMaid’s soft-close mechanisms are piston-damped. If they’ve failed, it’s usually because the door was over-extended during install or a warped door is forcing the piston past its travel range.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fresno, budgeting $45,000 to $130,000 for a KraftMaid-finished home addition or ADU covers the framing, drywall, electrical rough-in, flooring, and the cabinet package with installation. The cabinet line item alone runs $4,000 to $13,000 installed, which includes the KraftMaid boxes, doors, hardware, crown molding, and light rail. What drives the spread is run footage, finish grade, and whether we’re dealing with straight runs or peninsula and island work with finished end panels. Every estimate from Bradford Remodeling Co Fresno is a written price before any work starts, and the 365-Day Done Right Promise covers the entire project for a full year. If a hinge binds, a door rubs, or a drawer sticks because of our install, we come back and fix it at no charge.
We also stock and install Cambria, Silestone, and Kohler products on these same projects, so the countertop, sink, and cabinet package are spec’d from the same plan and installed by the same crew.
DIY or Call Us?
Adjusting a KraftMaid hinge is something any homeowner can do with a Phillips head screwdriver and ten minutes. The two adjustment screws on the hinge plate control side-to-side and depth movement. But if your doors are binding against a wall that’s moved, or your cabinet box is pulling away from the framing, that’s a structural issue, not a hardware issue, and you need a framing crew to address the wall before anyone touches the cabinets. And if you smell mold or see water staining at the back of a cabinet in your Fresno addition, do not ignore it. That’s a leak, and it will take the entire cabinet run with it if it hasn’t already. Call Curtis Lane and the crew at Bradford Remodeling Co Fresno at (559) 785-2712 and we’ll tell you over the phone whether it sounds like a hinge adjustment or a rehang. Written estimate, free, no pressure.
FAQs
KraftMaid cabinets installed correctly and kept in a ventilated, climate-controlled space should last 25 to 30 years in the Central Valley. The first thing to fail in our climate is the finish, not the box. We see finish delamination on thermofoil doors in poorly ventilated ADUs within five to seven years.
Most of the time, yes. If the cabinet boxes are sound and the only issue is wall movement or hinge alignment, we rehang the cabinets on the framing, re-shim the runs, and adjust every door and drawer. The boxes stay. You’ll probably need new hinge plates if the originals were over-adjusted. Call (559) 785-2712 for an honest read on what’s salvageable.
A single wall of cabinets, about 10 to 16 linear feet, takes our crew one day to remove, rehang, level, and adjust. A full kitchen worth of replacement cabinets with new countertops and sink runs three to five days. We’ll put the timeline in the written estimate, and the price doesn’t change once work starts.
We stock common KraftMaid hinge plates, soft-close dampers, door bumpers, and shelf clips on the truck, and we can source any specific KraftMaid door profile or finish through our supply chain, usually within three to five business days. We are an independent contractor, not affiliated with KraftMaid, but we’ve built and repaired enough of their cabinets to know exactly what to order for your line. Call (559) 785-2712 and tell us the model number inside the drawer box. We’ll match it before we arrive.
Bradford Remodeling Co Fresno is the KraftMaid home addition and ADU crew for Fresno homeowners who want one written price, one square install, and one full-year guarantee in writing. Curtis Lane runs every job the way he ran framing crews as a young man working out of Los Angeles Trade-Technical College: everyone knows the assignment, every line is level, and the estimate says what we build, and we build what the estimate says. Call (559) 785-2712 today to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fresno at Bradford Remodeling Co Fresno, serving Fresno and nearby areas.
