Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Fresno, CA | Bradford Remodeling Co Fresno
We provide independent KraftMaid cabinet installation, refacing, and repair across Fresno, from the Tower District to newer subdivisions east of Clovis. The difference here is that we build and repair KraftMaid boxes against Fresno’s actual conditions: 100°F-plus summers, dry air, and older homes with cabinet cavities that were never meant for modern 24-inch-deep boxes. Call Bradford Remodeling Co, your General Contractor in Fresno, at (559) 785-2712 for a written estimate before any work starts.
We’re a full-service KraftMaid sales & service contractor working throughout the Fresno service area. We source genuine KraftMaid hinges, glides, and shelf pins whenever they’re available, and we know which Vantage, Lattitude, Lexington, and Durham components fail first under sustained Central Valley heat. The estimate says what we build, and we build what the estimate says.
Why Fresno Residents Choose Us for KraftMaid Service
We’ve installed, refaced, and repaired KraftMaid cabinetry in hundreds of Fresno Kitchen Remodeling projects. Not in theory. In practice, on job sites from mid-century ranches near Fresno City College to 2000s stucco builds in the newer subdivisions. That reps matter, because KraftMaid’s construction has shifted over the years, and the Vantage line that went into a 1998 kitchen is not the same box as a 2024 Vantage order.
Curtis Lane, the owner here, grew up in Los Angeles and picked up his first framing hammer doing weekend work before studying construction technology at Los Angeles Trade-Technical College. He’s been swinging that same work ethic across Central California for over two decades. His crews know what square rough-in looks like and they don’t leave a site until it’s cleaned, documented, and every cabinet door opens without catching. That’s The Garrison Standard we operate under, and it’s been in place since 2004.
Every job gets a written price before tools come out. Every completed project carries a 365-Day Done Right Promise: if the work fails, we come back and correct it at no charge. A live person answers the phone 24/7, not a voicemail queue. And when our uniformed, background-checked crew shows up, you know exactly who’s walking through the door.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Fresno
KraftMaid builds a solid cabinet, but Fresno’s climate finds the weak points faster than most places. Here’s what we see, week in and week out:
- Thermofoil door delamination. The vinyl layer on thermofoil doors starts peeling at the edges when a kitchen sustains repeated 100°F-plus summer days. We see this most on upper cabinets near ceiling lines, where heat collects. Repair means stripping the vinyl and refacing the door profile, or full replacement if the MDF core has swollen.
- Sagging hinges on high-use base cabinets. The garbage cabinet, the silverware drawer, the pot drawer. Hinges sag, doors drift, and edges catch on adjacent frames. We replace with OEM soft-close hardware that holds alignment for years.
- Worn adjustable shelf pins in pantry MDF side panels. The pins chew into MDF over time. Shelves wobble. In Fresno’s dry air, MDF can also shrink slightly, loosening the pin holes further. We re-bore and install threaded inserts where the panel integrity allows.
- Loose drawer glide brackets on older Vantage lines. The screws strip, the glide drifts, and the drawer starts sticking or falling out of line. We re-secure with proper fasteners in the correct substrate, not just a longer screw.
- Heat-warped doors on walls facing afternoon sun. A west-facing kitchen without good insulation or window coverings absorbs direct Fresno sunlight. Doors with thin profiles can warp. We assess whether the box is salvageable and reface with a profile that resists the heat better.
KraftMaid Service in Fresno: What Local Conditions Mean for Your Equipment
Here’s a checkable fact about Fresno that most cabinet pages won’t tell you. Pre-1980 homes in the Tower District and the neighborhoods around it often have original built-in cabinetry that’s shallower and lower than modern KraftMaid boxes. The old built-ins run about 12 to 13 inches deep. New KraftMaid base cabinets are 24 inches deep, and uppers run 12 to 13. The depth mismatch on base cabinets means one of three things: the new cabinet sticks out past the old toe kick line, the floor shows a gap where the old footprint sat, or the installer cuts corners and leaves an awkward offset.
We don’t leave the offset. Our installs frequently require custom filler strips and scribe moulding to bridge the gap between the old footprint and the new box, without tearing out floors or drywall. That’s the kind of detail that separates a clean KraftMaid installation in Fresno from a cabinet that looks like a leftover from someone else’s job. The same applies in ranch homes with raised foundations, where floor height varies by up to a quarter inch from one side of the kitchen to the other. We shim and level before we anchor anything.
KraftMaid Models & Products We Service in Fresno
We install and repair KraftMaid Vantage, Lattitude, Lexington, and Durham lines, both current production and discontinued runs from the 1990s and 2000s. When a hinge, glide, or shelf pin fails, we source genuine KraftMaid replacement parts whenever they’re still available. For discontinued thermofoil doors that can’t be ordered through KraftMaid anymore, we recommend custom-matched refacing or replacement panels from quality aftermarket fabricators who match the profile and finish to the existing boxes.
We stock common OEM hinges, glides, and shelf pins in our Fresno shop for faster turnaround on repair calls. For full cabinet orders, we work with KraftMaid’s current catalog and provide written line-item pricing before any order is placed.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Fresno
KraftMaid work in Fresno prices on three things: box condition, scope, and whether you’re repairing or replacing. Here’s the honest range for the most common jobs:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
A reface runs on the lower end of the cabinet installation range. A full gut-and-replace with new KraftMaid boxes, quartz counters, and layout changes climbs toward the top. Every estimate is written, line-itemed, and fixed before work begins. Call (559) 785-2712 to schedule your free estimate and we’ll put the numbers in your hand.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Fresno
It depends on the door core. If the MDF underneath is solid and dry, we can strip the vinyl, rebuild the profile with a new maple or painted shaker front, and match the surrounding doors. If the core has swollen from heat or moisture, replacement is the honest call. In Fresno’s summer heat, delamination typically starts at the top and bottom edges, so we inspect the core before recommending anything.
Call (559) 785-2712 for an inspection and a written repair-or-replace recommendation.
Most KraftMaid boxes from that era accept modern concealed hinges with the same 35mm cup hole pattern. In most cases, yes, we can upgrade a 1990s Vantage or Lexington kitchen to soft-close hinges without refacing the doors. In some cases, the door profile is too thin for a new cup depth, and we’ll tell you that before cutting anything.
We keep touch-up kits matched to common KraftMaid finishes in our Fresno shop, including several of the maple and cherry stains that were popular in Central Valley homes built in the 1990s and 2000s. For current production finishes, we order matched kits from KraftMaid’s catalog. This is a small repair, but it’s one we handle regularly.
Yes, in most cases. We set new base cabinets on shims and level them independent of the tile. If the tile runs under the old footprint and the new cabinets are deeper, the finished toe kick covers the transition. Where the old tile stops short, we use scribe moulding and filler strips to close the gap cleanly without disturbing the existing floor.
For stock KraftMaid lines, plan on two to four weeks from order to delivery. Custom or semi-custom configurations can run six to eight weeks. We write the lead time into your estimate so you know the schedule before you commit. Call (559) 785-2712 and we’ll give you a written estimate with the delivery window included.
Service Areas Near Fresno
We provide KraftMaid installation and repair throughout Fresno and the surrounding communities. Our crews regularly work in Madera, Selma, Kerman, Fowler, and Dinuba, plus the Tower District, Woodward Park, and Sunnyside neighborhoods inside Fresno itself. We offer KraftMaid service in Madera and KraftMaid service in Selma for homeowners just outside the Fresno city limits.
Book Your KraftMaid Service in Fresno Today
If you’ve got sagging doors, peeling thermofoil, or a cabinet layout that fights you, we’ll fix it right the first time, in writing. Call (559) 785-2712 to schedule your free KraftMaid estimate in Fresno. A live person answers, day or night.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Fresno since 2004.
