A Bradford company - serving Fresno, CA
A new rear addition with a vaulted beamed ceiling and tall windows

Mighty Buildings Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fresno
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Mighty Buildings Driveway & Pavers: The Fresno Owner’s Guide

We stock and install Mighty Buildings-compatible driveway and paver systems throughout Fresno, with typical installed paver driveway work running $7,000 – $18,000 depending on square footage and substrate condition. Most Mighty Buildings owners call us after noticing settled pavers, pooling water, or edge restraints that have let go. We match the part, write the price before any work starts, and stand behind the installation for a full year under the 365-Day Done Right Promise.

Professional painters working on interior wall and ceiling remodeling project nationwide

Call (559) 785-2712

What you’re seeing is rarely a single bad paver. It’s usually the system underneath losing its grip: the base material has eroded, the sand joint has washed out, or the edge restraint was never anchored properly. That’s the part we replace.

Which Mighty Buildings Models This Applies To

A wide opening with a new beam where the kitchen wall was removed

Mighty Buildings panels and foundation systems are designed to tight tolerances, which means the driveway and paver interface has to be measured against those lines, not against whatever the previous contractor felt like doing that day. We regularly see this on Mighty Buildings accessory dwelling units and detached structures where the driveway apron meets the main panel line.

Identifying the right paver system starts with the existing unit size, not the brand stamp on the paver face. Most Mighty Buildings driveways in Fresno use modular concrete pavers in 4-by-8 or 6-by-9 nominal sizing, but the critical measurement is the joint width and the bedding depth. If the original install used a shallow base, any replacement paver on top will fail the same way, regardless of how good the paver itself is.

OEM versus aftermarket matters less with hardscape than with mechanical parts. Belgard and Unilock pavers are documented, traceable products with manufacturer specs that hold up to Fresno summers. We specify those brands by name in the written estimate so you know exactly what you’re paying for. Bradford Remodeling Co Fresno is an independent service provider, not affiliated with Mighty Buildings, but we match the paver to the existing Mighty Buildings dimensions and slope.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Mighty Buildings Driveway & Pavers Is Failing

  • Settling or low spots that hold water after rain. Fresno’s clay-heavy soil expands and contracts with moisture, and without a compacted aggregate base the pavers drop unevenly. The paver didn’t fail; the base did.
  • Edge restraints separating from the paver field. When the plastic or aluminum edging lifts, the outer pavers start drifting. You’ll see a widening gap at the driveway edge first.
  • Sand joints washing out or weeds sprouting between pavers. Joint sand is the load-transfer mechanism. Once it’s gone, pavers grind against each other and chip.
  • Visible cracks or spalling on multiple pavers in one area. Concentrated stress from a low spot or a root pushing up will break pavers in a pattern. One cracked paver is a fluke. Three in a row is a base problem.
  • Driveway slopes toward the foundation instead of away. If water is running back toward your Mighty Buildings structure, that’s a grading failure, not just a paver issue. We flag this on every Fresno estimate because the wet-dry soil cycle here makes it worse faster than most places in California.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Paver driveway installation in Fresno runs $7,000 – $18,000 for a full tear-out and rebuild. A repair of a settled section, not the whole driveway, typically falls at the lower end or below that range depending on how much of the base we need to recompact.

What drives the price: total square footage, base depth, whether the existing base can be salvaged or needs to be excavated and rebuilt, and the paver you select. Belgard and Unilock both have lines at different price points. The written estimate breaks out the parts, the labor, the base material, and the haul-away separately. No numbers that move at the door. That’s The Garrison Standard, and it’s non-negotiable.

Professional painters working on interior wall and ceiling remodeling project nationwide

Every completed job carries the 365-Day Done Right Promise. If the pavers settle, the edge lets go, or the joints fail within a year, we come back and correct it at no charge. In writing, every time.

DIY or Call Us?

For a driveway, the honest answer is call us. You can hose down the area and watch where water pools, mark the low spots with chalk, and take measurements. That’s useful information for the estimate. But resetting pavers properly means cutting out the affected area, checking the base compaction, adding and compacting new aggregate, re-bedding, re-sanding, and re-compacting the joints. Do it half-right and the same low spot comes back next winter.

We show up with background-checked, uniformed technicians. You know who’s on your property before the truck parks. Call (559) 785-2712 and we’ll send someone to measure, test the base, and write you a price.

FAQs

A garage converted into a guest room and home office

Getting started with Bradford in Fresno

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Fresno team

A local crew that works across Fresno and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Fresno? Licensed & insured · Free in-home estimates response · free estimates
Call (559) 785-2712
Local Service Coverage

Request a Free Estimate in Fresno

Tell us what you need - Bradford Remodeling Co Fresno responds fast. No obligation.

By sending this request, you agree to the terms of our Privacy Policy and consent to being contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch