Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Construction in Fresno, CA | Bradford Remodeling Co Fresno
We provide independent Owens Corning construction service across Fresno, from roof replacements with Duration® shingles to FOAMULAR® XPS insulation retrofits. The one thing that sets our Owens Corning work apart here is that we’ve spent over two decades watching how their products perform under Fresno’s specific conditions: 100°F-plus summers, expansive clay soil, and pre-1980 housing stock that was never built for Title 24. We’re not a manufacturer affiliate. We’re a local contractor who gives straight assessments without brand bias. Call (559) 785-2712 for a free estimate on any Owens Corning roof or insulation project in Fresno.
Why Fresno Residents Choose Us for Owens Corning Service
Owens Corning makes a solid product line. The issue in Fresno isn’t usually the material itself. It’s whether the installation accounts for what our summers do to a roof assembly and what our clay soil does below grade. We’ve been installing and repairing Owens Corning Duration®, Oakridge®, and FOAMULAR® products in Fresno long enough to know where the weak points show up first: granule loss at eaves, sealant failure on low-pitch ranch roofs, and R-value degradation when foam board gets baked by reflected UV in poorly ventilated attics. Curtis Lane, owner of Bradford Remodeling Co and a General Contractor in Fresno, grew up in Los Angeles and trained in the construction technology program at LA Trade-Technical College. He’s been running crews across Central California for over two decades, and his team has logged plenty of hours on projects from Tower District bungalows to commercial build-outs along Shaw Avenue. We stock OEM-compatible Owens Corning parts locally so we don’t have to wait on a distributor order when a Fresno homeowner needs a repair done this week. Our loyalty is to the homeowner, not to the brand’s retrofit program. You get the product that’s right for your house, not the one that pads a manufacturer’s sales target.
Styles & brands we work with
Common Owens Corning Construction Problems We Solve in Fresno
- Granule loss and curling at roof edges on Duration® and Oakridge® shingles. Fresno attics without adequate ventilation hit 140°F or hotter in July. That heat cooks the shingle mat from underneath while the sun bakes it from above. The result is premature granule shedding and edge curling, especially on west-facing roof planes in neighborhoods like the Roosevelt area.
- FOAMULAR® XPS losing R-value from reflected UV exposure. When foam board sits in a roof assembly with a radiant barrier gap that isn’t properly detailed, reflected sunlight degrades the board’s surface over time. We see this most often on flat and low-slope sections where homeowners or a previous contractor skipped the thermal barrier.
- Moisture wicking in below-grade FOAMULAR® installations on raised foundations. Fresno’s expansive clay holds water seasonally. When foam board is installed against a stem wall without proper drainage, it pulls moisture up and compresses. The insulation stops doing its job and the raised foundation starts showing efflorescence. Tower District and older Fig Garden homes built before 1960 are the usual suspects.
- Shingle sealant strip failure on low-pitch ranch roofs. Fresno has thousands of single-story ranch homes built between 1960 and 1990 with roof pitches at 3:12 or lower. Owens Corning shingles are not rated for slopes that shallow unless you upgrade the underlayment, which many original installs didn’t. When the sealant strips break, wind uplift peels shingles back during our occasional intense winter storms.
- Inadequate attic insulation forcing AC systems to run nonstop in summer. Many pre-1980 Fresno homes have R-0 to R-11 attic insulation. Owens Corning FOAMULAR® XPS boards and blown-in fiberglass retrofits solve this, but only if the attic ventilation is addressed at the same time. We regularly find homes where someone added insulation but sealed the soffit vents, turning the attic into an oven.
Owens Corning Service in Fresno: What Local Conditions Mean for Your Equipment
Fresno’s pre-1980 homes in the Tower District and Roosevelt neighborhoods often have no attic insulation and original shake or three-tab roofs. Our Owens Corning work in those areas frequently starts with a Title 24 energy audit that reveals R-0 to R-11 attic conditions. That’s a number you rarely see in newer Clovis subdivisions, where insulation already meets code and the roof decking hasn’t been heat-cycled for forty years. What this means for an Owens Corning owner in an older Fresno neighborhood is that a simple shingle replacement won’t solve the energy problem, which is why our Fresno Kitchen Remodeling clients often start with similar whole-home efficiency upgrades. The house needs the full stack: proper attic ventilation, radiant barrier, FOAMULAR® XPS where the assembly calls for it, and new shingles rated for our heat. We’ve walked into Tower District homes where the homeowner just wanted a patch job and walked out with a documented scope that cut their July AC runtime by a third. That’s the difference between doing the work and doing it for Fresno’s climate. Our crew replaced a 1978 three-tab roof on a Spanish Revival home in the Tower District after finding Owens Corning Duration® shingles from a 2005 patch had lifted at the eaves due to heat-weakened sealant. We pulled back the old decking, installed fresh radiant barrier and Owens Corning FOAMULAR® XPS under a new Duration® roof, and re-sheathed the gable ends to meet Title 24.
Owens Corning Models & Products We Service in Fresno
Our crews work on the full Owens Corning residential line: Duration® shingles, Oakridge® shingles, ProEdge® hip and ridge shingles, and FOAMULAR® XPS insulation. For roofing repairs, we use Owens Corning-branded replacement shingles and accessories whenever available to match existing warranties and color blends. When Owens Corning underlayment or flashing isn’t the fastest option for a Fresno heat repair, we run spec-equivalent products from GAF and CertainTeed. For insulation, we favor FOAMULAR® for rigid applications but specify closed-cell spray foam or blown-in fiberglass where moisture or retrofit access demands it. We stock common Owens Corning parts and matching shingle colors locally so turnaround on Fresno service area jobs stays tight. Read more about our Owens Corning sales & service experience.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Service Pricing in Fresno
Here’s what Owens Corning work costs in Fresno, based on our current labor and material rates for this market:
| Service | Fresno Price Range |
|---|---|
| Roof Replacement (architectural shingle) | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Gutter Replacement with leaf guards | $1,200 – $4,500 |
| FOAMULAR® XPS Insulation Retrofit (attic) | $1,500 – $5,000 |
The spread on a roof replacement comes down to square footage, pitch, decking condition, and whether we’re pulling permits for a Title 24 retrofit. A 1,200-square-foot ranch in Fresno is a different job than a two-story Spanish Revival in the Tower District with multiple gable ends. Every estimate we give is a written, line-item price before any work starts. No numbers move at the door. Call (559) 785-2712 if you want a straight number for your Owens Corning project.
Serving Fresno, CA - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Owens Corning Construction in Fresno
Duration® shingles fail early in Fresno when attic temperatures exceed 140°F because the shingle mat degrades from below while the sun bakes the granule surface from above. The fix is a properly vented attic, often with added radiant barrier, before you replace the shingles. If you patch the roof without fixing the ventilation, you’ll be back on the ladder in five years. Call (559) 785-2712 for an inspection and a written quote.
FOAMULAR® XPS can be used below slab in Fresno, but only with proper drainage and a vapor barrier separating the foam from the clay. Fresno’s expansive clay holds moisture seasonally, and if the foam board wicks that moisture, it compresses and loses R-value. We spec below-grade FOAMULAR® carefully on every raised-foundation and slab project so the insulation actually performs ten years from now.
Yes, a full Owens Corning roof replacement improves Title 24 compliance in Fresno when it includes the right underlayment, roof deck insulation, and attic ventilation upgrades. A shingle swap alone won’t get you there. We pull permits on every roof replacement and document the Title 24 changes on the permit set. Call (559) 785-2712 if you want to know what your specific house needs.
You need a full re-roof when granule loss exceeds 30% of the shingle field or when the decking shows heat-related warping. At 12 years in Fresno, depending on attic ventilation and exposure, you might be at that line. We repair roofs when damage is localized, but we won’t sell you a patch job on a roof that’s already failing. An inspection costs nothing. Call (559) 785-2712.
ProEdge® hip and ridge shingles work fine on low-pitch Fresno ranch roofs when the field underlayment is upgraded to a self-adhered membrane and the roof meets Owens Corning’s minimum slope ratings. On slopes below 3:12, we don’t install shingles at all. We’ll recommend a different assembly that won’t leak during the next intense winter storm. Call (559) 785-2712 for a straight assessment.
Service Areas Near Fresno
We serve Fresno and the surrounding communities, including Owens Corning service in Madera, Owens Corning service in Selma, Kerman, Fowler, and Dinuba. If you’re within a short drive of Fresno and need Owens Corning roof or insulation work, call us. Our crews run routes through these towns weekly, and our Fresno pricing applies across the service area.
Book Your Owens Corning Service in Fresno Today
Every Owens Corning project we take in Fresno gets a written price, a clear scope, and our 365-Day Done Right Promise in writing before we start. The estimate says what we build, and we build what the estimate says. Call (559) 785-2712 today to schedule your free estimate.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Fresno since 2004.
