Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fresno Homeowners Choose Unilock Construction
Unilock pavers and retaining walls are a strong fit for Fresno, where summer temperatures routinely cross 100°F and irrigation water runs hard. As a Fresno Unilock service provider, Bradford Remodeling Co Fresno installs and repairs Unilock pavers, driveways, patios, and walls across the city. We are not authorized by or affiliated with Unilock, but our crews work with these products every week and know how they behave in Fresno’s clay soil and high-UV climate. For a written estimate on Unilock work, call (559) 785-2712.
What separates our Unilock work from a generic hardscape crew is that we see these products after ten years of Central Valley sun and irrigation cycles. That’s where the real information lives. A paver that looks fine on installation day may be sitting on a base that will heave, shift, or wash out in three winters. Our job is to get the base right the first time and make the repair decision honestly when something fails.
Why Trust Bradford Remodeling Co Fresno for Your Unilock Construction?
Curtis Lane has been running crews in Central California for over two decades, and his team has installed and repaired Unilock pavers from older Tower District properties to newer subdivisions where driveways get full afternoon exposure. Curtis trained in construction technology at Los Angeles Trade-Technical College and built his reputation on clean base prep and square layout. When a Unilock paver job fails, the cause is almost always underneath the pavers, not in the paver itself. We start there.
Every Unilock project we take on gets a written price before any work starts, and every completed job carries the 365-Day Done Right Promise. If the work fails within a year, we return and correct it at no charge. That guarantee applies to our Unilock paver driveways, patios, and walls just as it applies to a kitchen or bath remodel. The Garrison Standard is what we operate under: scope in writing, price in writing, guarantee in writing. You will know exactly who is on your property, what they are doing, and what it costs before the first paver is pulled.
We are independent. Unilock does not authorize, certify, or endorse us. That independence means we make repair and replacement decisions based on what is actually failing, not on what a manufacturer’s program tells us to replace. When a Unilock paver driveway can be repaired by removing a section and re-compacting the base, we will say so and price it accordingly rather than pushing a full re-install.
Styles & brands we work with
Common Unilock Construction Problems We Fix in Fresno
The issues we see on Unilock products in Fresno are fairly consistent. Here are the five we encounter most often, with real causes rather than generic descriptions.
- Efflorescence whitening on Unilock Series 3000 Pavers. Fresno’s irrigation water carries a high concentration of dissolved minerals. When water wicks through the paver and evaporates at the surface, it leaves white mineral deposits behind. This is a cosmetic issue, not a structural one, but it can look alarming on a dark paver. We clean efflorescence with the right pH-specific cleaners and seal to slow its return.
- Shifting and settling of Unilock Brussels Block Pavers from expansive clay soil. Fresno’s clay-rich soil swells when wet and shrinks when dry. Over repeated cycles, a paver surface on an inadequately compacted base will develop low spots, dips, and uneven joints. The fix is almost never “add more sand on top.” It requires removing the affected section, correcting the base, and reinstalling with proper compaction.
- Fading and color washout in high-UV exposure. Red and charcoal Unilock tones take a beating in Fresno’s summer sun. Years of direct afternoon exposure, combined with zero shade on most suburban driveways, gradually dulls surface color. A quality penetrating sealer with UV inhibitors slows this, but no sealer stops it entirely. We set realistic expectations on this before any installation.
- Edge restraint failure causing paver spread on driveways and walkways. When the plastic or aluminum edge restraint along a paver perimeter fails, the outer course of pavers begins to drift outward. You will see a widening gap at the edge or a noticeable curve in what should be a straight line. Left alone, it gets worse. We replace edge restraints and re-set the affected pavers.
- Retaining wall leaning or bulging on Unilock Rivercrest or Ledgestone walls. A Unilock wall that leans after a rainy winter usually means two things: insufficient drainage behind the wall or a base that was never deep enough for the wall’s height. In Fresno’s clay soil, both are common on walls built by crews who skipped the geogrid or drainage stone. Some leaning walls can be repaired by rebuilding the affected section; others need a full tear-out if the block itself has shifted too far out of alignment.
Unilock Parts & Our Repair-vs-Replace Approach
When we repair Unilock work, we source Genuine Unilock replacement units through local hardscape suppliers in the Fresno area to match color and size as closely as possible. Pavers fade over time, so a brand-new unit next to a ten-year-old unit will not be a perfect color match. We are upfront about that before any repair proceeds.
For joint stabilization, we use polymeric sand and sealers from aftermarket makers like Alliance Gator. These are proven products that hold up in Fresno’s heat and handle the expansion and contraction cycles better than standard joint sand. We stock common Unilock paver sizes and edge restraints locally so we are not waiting on a week-long parts order for a standard repair.
The repair-versus-replace decision comes down to what is underneath the pavers. If the base layer is sound and the failure is isolated, we repair individual damaged pavers or wall units. If the bedding layer has eroded, washed out, or heaved from clay expansion, patching the surface only buys time before the same failure returns. In that case we recommend replacing the full section with proper base work so the repair actually lasts. “The estimate says what we build, and we build what the estimate says.” For a straight answer on your Unilock surface, call (559) 785-2712.
Our Unilock Service Process – Step by Step
Here is how a Unilock paver or wall job runs with Bradford Remodeling Co Fresno, from the first phone call to the written guarantee.
- 1
Site inspection and diagnosis. We walk the existing paver surface or the proposed installation area. For repairs, we check for base failure, drainage problems, edge restraint condition, and paver damage. For new installs, we evaluate soil type, slope, and drainage needs before any design discussion.
- 2
Written estimate with scope and price. You get a written price before any work starts. No verbal ballpark followed by a bigger number later. The estimate includes material specs, base depth, edge restraints, and the specific Unilock product we are using.
- 3
Base preparation and installation. For new Unilock paver driveways and patios, we excavate to the proper depth, compact the subgrade, and install a geotextile fabric where needed. Base gravel is compacted in lifts, bedding sand is screeded, and pavers are laid to the pattern specified. For retaining walls, we install proper drainage stone and geogrid reinforcement per the wall’s height.
- 4
Edge restraints and joint stabilization. We install new edge restraints on every Unilock paver perimeter and fill joints with polymeric sand. The sand is activated properly with water so it sets firm and resists washout and ants.
- 5
Final inspection and written guarantee. We walk the finished surface with you, confirm the scope matches the estimate, and put the 365-Day Done Right Promise in writing. Your site is cleaned, excess material is hauled off, and you have a signed guarantee in hand before we leave.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Fresno
Our crews work with the Unilock product lines most common in Fresno driveways, patios, and landscape walls. We install and repair Unilock Series 3000 Pavers, a dense, high-strength paver suited to vehicle traffic. We also work regularly with Unilock Brussels Block Pavers, an old-style tumbled paver that is common on older Central Valley homes. For retaining and landscape walls, we service and install Unilock Rivercrest Wall and Unilock Ledgestone Wall systems. We keep common paver sizes and edge restraints in local stock for quicker turnaround on repairs, and we source full skids of new product for installations through Fresno-area hardscape suppliers.
We Also Service These Brands
Bradford Remodeling Co Fresno offers General Contractor services, not just single-brand hardscape work. Alongside Unilock, our teams work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. That breadth matters when a Unilock patio project grows into an outdoor kitchen or a covered structure, because the same crew can handle the entire scope under one written estimate and one guarantee.
FAQs – Unilock Construction Service in Fresno
You cannot stop UV fading entirely, but you can slow it with a quality penetrating sealer that includes UV inhibitors. We apply sealer after installation and recommend reapplication on a schedule based on your paver’s sun exposure. Pavers with full afternoon exposure in Fresno will need more frequent sealing than shaded areas. Call (559) 785-2712 for a recommendation specific to your paver type and site conditions.
Yes. Efflorescence is a mineral deposit left by evaporating water, and it responds to pH-specific cleaning products rather than pressure washing alone. We clean the surface, correct any drainage or irrigation issues that are feeding moisture through the pavers, and seal to reduce recurrence. The cleaning itself is straightforward; preventing the return means addressing where the water is coming from.
Sometimes. A leaning Unilock wall usually indicates poor drainage or an undersized base, and the repair decision depends on how far the wall has moved. If the blocks are still structurally sound and only a section has shifted, we can often rebuild that section with proper drainage stone and geogrid. If the entire wall has rotated significantly, a full rebuild is the honest answer. We will tell you which one you have and put the price in writing either way.
Yes, and this is one of the most commonly skipped steps on Fresno paver jobs. Clay soil expands and contracts with moisture, so edge restraints carry more lateral load here than they would in a sandy coastal soil. We install heavy-duty edge restraints and secure them properly at the base level, not just staked into the surface, because that is what keeps the outside course of pavers from spreading over time.
We can match the paver size and product line exactly by sourcing Genuine Unilock units through local suppliers. Color is a different conversation. Pavers that have been in Fresno sun for several years will have faded, and new units from the same product line will look darker. We can discuss blending strategies or whether a full replacement of the visible surface makes more sense for your addition.
Here are the price ranges we work within for Unilock paver projects in the Fresno market:
| Unilock Service | Price Range |
|---|---|
| Paver Driveway Installation (Unilock) | $7,000 – $18,000 |
| Paver Patio Installation (Unilock) | $3,500 – $11,000 |
| Driveway Replacement (Unilock pavers) | $5,000 – $14,000 |
These ranges reflect the size of the surface, base condition, access, and whether we are removing an existing driveway or starting fresh. Every project receives a written price before work starts, and that number does not move at the door. Call (559) 785-2712 for an exact quote, with no obligation.
Book Your Unilock Service in Fresno, CA
If your Unilock pavers are shifting, fading, or spreading, or if you are planning a new paver driveway or patio in Fresno, call Bradford Remodeling Co Fresno at (559) 785-2712. You will reach a live person, get a written estimate, and know exactly what the work includes before anything begins.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Fresno and the surrounding Central Valley since 2004.
