







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The Fresno Owner’s Guide
Wellborn fence installation in Fresno typically runs $3,500 to $9,000 for a complete run, including materials, post setting, and labor. Most jobs we schedule take two to three days on site, depending on linear footage, gate count, and what we find once we start digging. You usually discover the problem the same way every Fresno homeowner does: a post leaning after the winter rains, a gate dragging on the concrete, or pickets popping loose at the nail lines because the sun cooked the original fasteners. If you’re down a fence section and staring at a Wellborn product that failed, this page tells you what it costs, what causes it, and what a correct replacement looks like.

Here’s the straight read: Wellborn is known for cabinetry, not fencing. If you have a Wellborn-branded fence product or a contractor installed Wellborn-compatible materials, we treat it the same way we treat any job. We identify what you have, match the material or upgrade it, and price it in writing before anyone swings a hammer. Bradford Remodeling Co Fresno is an independent service provider and not affiliated with Wellborn, so there’s no brand politics in our recommendation. We fix what you have or replace it with something that holds up to Fresno sun and soil. Either way, you get a written price and a one-year guarantee on the work.
- Installed price in Fresno: $3,500 to $9,000 for a typical fence run.
- What drives cost: linear feet, post depth, gate hardware, material choice, and access.
- Timeline: Most fence replacements take two to three days on site.
- Guarantee: Our 365-Day Done Right Promise covers the entire install in writing.
- First step: Call (559) 785-2712 for a free estimate.
Which Wellborn Models This Applies To

Let’s be clear about the Wellborn name here. Wellborn Cabinet, Inc. manufactures cabinetry out of Ashland, Alabama. They don’t make fencing. What we see in Fresno are two situations: either a homeowner has a fence built from salvaged or repurposed Wellborn cabinet stock (uncommon, but it happens with builders doing creative side work), or a contractor marketed a “Wellborn-style” fence without using Wellborn product at all. If you have actual Wellborn-branded material in your fence, you’re likely looking at repurposed interior-grade wood, which was never engineered for ground contact or Central Valley UV exposure.
Here’s the compatibility gotcha that matters: interior cabinet wood carries no exterior treatment rating. If someone built you a Wellborn-board fence, it’s failing faster than standard redwood or pressure-treated pine would. That means the decision tree is simple. If the material is sound, we can reinforce the structure and replace hardware. If it’s checked, cupped, or rotting at grade, replacement with proper exterior material is the honest call. We carry redwood and pressure-treated Doug fir on the truck, and we can quote cedar or composite with a material order ahead of the job. You won’t get a Wellborn fence part number from us because there isn’t one. You’ll get a straight answer about what’s actually in the ground and what it will take to make it right.
Styles & brands we work with







Signs Your Wellborn Fence Installation Is Failing
Whether the original install used Wellborn cabinet stock or a knockoff that borrowed the name, the failure signs show up the same way in Fresno. We see these five most often:
- Posts leaning at the gate line. Fresno’s clay soil expands and contracts with moisture. Shallow posts set in two feet of clay shift within a season or two. The gate is always first because it carries live weight.
- Pickets splitting at the nail heads. Interior-grade wood swells faster than exterior material when it takes on water. Add Fresno’s 100-degree afternoons and the boards split right where the fastener bit in.
- Gate dragging or binding. When a post shifts even a half inch out of plumb, the gate hardware loses its geometry. The latch stops lining up, the hinge binds, and the whole frame torques.
- Rot at the bottom rail. This is the classic tell for cabinet stock repurposed as fence board. Interior wood has no ground-contact rating. Moisture wicks up from the soil line and the bottom rail crumbles first.
- Fastener rust streaks bleeding down the face. Interior cabinet fasteners are often interior-rated, which means bright steel instead of hot-dipped galvanized or coated deck screws. When they corrode in the Fresno elements, the streaks show up fast.
None of these is a cosmetic issue. Each one is a structural failure in progress, and ignoring it typically means the fix doubles in scope. A post that’s leaning today is a section that’s on the ground after the next heavy rain.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Fresno, a Wellborn-related fence replacement runs $3,500 to $9,000 installed. That’s a real number, and here’s what’s inside it. At the low end, you’re looking at a shorter run, a single walk gate, and post replacement only. At the high end, you’re in full replacement territory: new posts every six to eight feet, new rails, new pickets, two gates with quality hardware, and haul-off of the old material.
| Scope | Typical Fresno Price |
|---|---|
| Post replacement only (up to 6 posts) | $3,500 – $5,500 |
| Partial fence replacement with gate rebuild | $5,000 – $7,500 |
| Full fence replacement, two gates, new hardware | $7,000 – $9,000 |
What drives the range? Linear footage is the big one. Post depth matters because Fresno clay requires a deep set with crushed rock backfill, not just concrete. Gate count and hardware add up fast. And if the old footing concrete needs jackhammering out, labor climbs. Every Bradford Remodeling Co Fresno estimate spits out a fixed price. No numbers that move at the door. The work is covered by the 365-Day Done Right Promise, which means if anything we built doesn’t hold within a year, we come back and fix it at no charge.
DIY or Call Us?
You can check a few things before you spend a dollar. Walk the fence line and look for visible post lean. Grab the gate at the latch corner and lift, feeling for sag. Note where the wood is touching soil directly. Those observations help you describe the problem when you call, and they help us quote accurately over the phone. That’s the owner’s job: knowing what’s wrong before someone shows up.
What you shouldn’t do is dig out and reset posts on a fence that’s holding weight, or try to true up a gate frame with shims and longer screws. A gate under tension can kick back when hardware lets go, and a post that’s holding a whole section of fence is not the thing to learn on. We’ve rebuilt plenty of fences where a well-meaning weekend cost the homeowner double because the section collapsed halfway through. It’s not about protecting the trade. It’s about the physics of a loaded structure. Call (559) 785-2712, describe what you’re seeing, and let us put the number in writing before anyone starts work. The estimate says what we build, and we build what the estimate says.
FAQs

A properly built fence in Fresno with exterior-grade material should last 15 to 25 years, depending on wood species and sun exposure. Interior or repurposed material like cabinet stock can fail in three to five years. Call (559) 785-2712 for an honest assessment of what’s in the ground now.
If the posts are sound and the failure is limited to pickets, rails, or hardware, repair is absolutely on the table. If the structure is shifting or rot is present at grade, patch work only buys you a season. We’ll tell you which one you have before we sell you either.
Most Fresno fence replacements take two to three days on site. Post removal and setting usually consumes the first day. Rails, pickets, and gate hardware follow. You’ll have a clean site and a written guarantee in your hand before the crew leaves.
No one stocks Wellborn fence parts because Wellborn doesn’t manufacture fencing. We carry proper exterior materials on the truck and can quote specialty material with a lead time. If you have Wellborn-branded material in your fence, we’ll match it where possible or replace it with something rated for the job.
If you’re in Fresno and staring at a fence that’s given up, call Bradford Remodeling Co Fresno at (559) 785-2712. We’ll schedule a free estimate, put the price in writing, and build it so you’re not revisiting this page again next year.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fresno at Bradford Remodeling Co Fresno, serving Fresno and nearby areas.


