Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Madera
General contractor work in Madera runs about $9,000 to $130,000 depending on scope, with kitchens between $14,000 and $45,000, bathrooms $9,000 to $28,000, and full additions starting around $45,000. We coordinate every permit, inspection, and trade from rough-in to final walkthrough so you’re not chasing subs or wondering what got missed. Brad and our General Contractor team run a tighter schedule than most Madera homeowners expect. Call (559) 785-2712 for a written estimate before any work starts.
Why Bradford Remodeling Co Fresno Is Madera’s Preferred General Contractor Company
Our crews spend serious time in Madera, from the older bungalow blocks near the downtown core off Yosemite Avenue to the new subdivisions pushing east of Highway 99. We know what the city’s inspectors look for, and we know the soil. That second part matters more than people think. A contractor who has never trenched through Madera hardpan learns an expensive lesson on your dime. We already learned it. So when we quote a rough-in or a retaining wall, the price holds because we knew before we started what the ground would do.
The Garrison Standard is the operating rule here. Every job gets a written price before any work starts. Every completed project carries the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge. That guarantee is in writing, signed, in your hand at close-out. Curtis Lane runs the crew, and he holds every jobsite to that standard. Calls are answered by a live person around the clock, not a queue.
Styles & brands we work with
Residential General Contractor in Madera
A residential general contractor in Madera manages the full build from demolition to final inspection, and around here that means handling things a coastal contractor never thinks about. The local wind code requires roof coverings and exterior openings designed for a basic wind speed of 85 mph under ASCE 7-10. The clay soil swells with winter rain and bakes hard in summer, so foundations move. And east of Highway 99, you’re likely to hit Madera hardpan, a cemented soil layer that turns a simple trench into a hydraulic job. A quote that doesn’t account for any of that is a number that will move once the work starts. We don’t write quotes like that.
Scope and Permits
We pull permits with the City of Madera building division for everything that requires them: structural changes, electrical, plumbing, mechanical. The permit set includes wind-load documentation for roof work, shear-wall and strapping details for additions, and soil notes where trenching or slab work is planned. If a contractor says “we don’t bother with permits for something this small,” that’s a red flag, especially if you ever file an insurance claim later.
A written scope with line items for compaction, sleeving, and drainage is standard on our Madera bids. Cheap bids leave those out. The work looks fine for a season, then the clay moves and the cracks show up.
What a Full Remodel Costs Here
Plan on $14,000 to $45,000 for a kitchen remodel in Madera, $9,000 to $28,000 for a bathroom, and $45,000 to $130,000 for a home addition. The range is wide because a 1960s tract home off Sunset Avenue has different rough-in conditions than a new build off Avenue 12. We’ll give you one number, written, before we start. It won’t change at the door.
Hire a General Contractor in Madera
Homeowners hire a general contractor in Madera when the job spans multiple trades and someone has to own the schedule, the permit set, and the inspections. That someone is us. We run point on electrical, plumbing, framing, drywall, tile, and roofing so you get one point of contact and one written warranty instead of five subs pointing fingers at each other. We also coordinate the inspection sequence correctly. Madera inspectors want to see rough-in before cover, strapping before drywall, and final verification on wind-rated connectors. When the sequence is right, it closes fast.
Kitchen and Bath Remodels
A kitchen remodel in Madera often starts with opening up a wall in an older home and finding plumbing that was never vented properly or electrical that isn’t grounded to current code. That’s normal. We plan for it. We run KraftMaid and Wellborn cabinetry, Cambria and Caesarstone tops, and Delta or Moen fixtures so every specified material has a manufacturer’s spec sheet and warranty behind it. Substitutions don’t happen silently.
A bath remodel means re-plumbing the rough-in, often through hardpan below the slab. We trench it right, sleeve the supply lines in sand, and backfill with mechanical compaction so the new shower pan doesn’t heave two years later.
Additions and Whole-Home Work
A room addition in Madera requires engineered plans for the foundation and wind-load path. We bring in the structural engineer, file the drawings with the city, and build to the calcs. No shortcuts on connectors, no reusing old roof-to-wall parts just because they’re already there. The 365-Day Done Right Promise covers it all, in writing.
Trusted Brands We Service in Madera
We install and service Delta, American Standard, and Toto fixtures and trim, along with Blanco sinks and faucets. That doesn’t mean we only work on those brands, it means when we spec a material, we use a manufacturer we can call and hold accountable. Parts for Madera customers are sourced through our local supply network, so we’re not waiting on a slow boat for a shower valve cartridge or a cabinet hinge. Turnaround on warranty parts is typically days, not weeks.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Madera Homes
- Cracked concrete over Madera hardpan. Low-bid crews skip mechanical compaction, then act surprised when the new driveway cracks along the clay seams after the first winter rain. We compact in lifts and run drainage so water doesn’t pond against the slab edge.
- Stucco patches on settled foundations. Older downtown homes get a cosmetic stucco patch while the perimeter foundation keeps settling. The new work cracks within a season. We check the foundation first, then patch what’s actually moving.
- Roof replacements with old connectors. During storm-season roof work, some crews reuse existing roof-to-wall connectors that don’t meet Madera’s 85 mph uplift requirement. The assembly looks done and isn’t compliant. We install new rated hardware and document it for your file.
- Drainage failures on flat lots. Former farmland east of Highway 99 was graded for irrigation, not for home sites. We install proper swales and drain rock around foundations so water doesn’t stand against the stem wall during heavy winter rain.
Pricing for General Contractor in Madera, CA
Here are the real numbers we quote for Madera, not a national average pulled from a website. Bathroom remodels run $9,000 to $28,000. Walk-in showers run $4,500 to $12,000. Roof replacement runs $8,000 to $20,000 depending on the roof area and whether it’s a tear-off or a layover. Concrete driveways run $4,500 to $12,000, with the higher end covering full demo and proper compaction over hardpan. Home additions start at $45,000 and go to $130,000 for larger square footage with complex foundations.
| Service | Price Range in Madera |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Home Addition | $45,000 – $130,000 |
Every quote is itemized and written. Call (559) 785-2712 for a free estimate. We’ll walk the site, check the soil, check the existing structure, and give you a number that holds.
We Also Serve Cities Near Madera
Our crews run jobs throughout the Central Valley corridor. We work regularly in Madera and also serve Fresno, Clovis, Kerman, and Sanger for general contracting, remodels, and additions. If you’re on the edge of the Madera city limit or a few miles out in the county, call us anyway. We’ll tell you straight whether we can take the job.
Serving Madera, CA - Our Local Coverage Area
We’re based in the Madera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Madera
Yes, for most work beyond paint and flooring you need a permit from the City of Madera. Anything that touches plumbing, electrical, structural framing, or exterior openings requires a filed permit and inspections. The city checks wind-rated connections on roof work, grounding on electrical, and slope on drains. A finish-only job like swapping cabinet fronts might not need one, but the moment you move a wall or open a shower rough-in, it does. We pull permits on every job that requires them so the final inspection record matches the work done. Call (559) 785-2712 and we’ll tell you what your specific project needs before you sign anything.
Madera building code requires roof coverings and exterior openings designed for a basic wind speed of 85 mph per ASCE 7-10. That means rated shingles, proper fastener schedules, and roof-to-wall connectors installed to the manufacturer’s uplift numbers. You verify it by checking the permit file: the approved plans list the wind design, and the final inspection sign-off confirms it was built as drawn. Ask your contractor for the connector schedule and the inspection record before final payment. We hand you that paperwork at close-out.
Madera hardpan is a dense, cemented soil layer common east of Highway 99, and it can turn a simple trench into a hydraulic-excavation job that takes twice as long. A fair quote includes line items for hardpan trenching, sand sleeving around supply lines, mechanical compaction on backfill, and drainage design so water doesn’t trap against the foundation. A low quote that skips those line items is telling you the contractor hasn’t dug in Madera before, or plans to cut corners. Call (559) 785-2712 for an honest number that includes the soil work.
You’ll want the approved permit set, the passed inspection records, the wind-load calculations, and the manufacturer spec sheets for the materials installed. That paperwork shows the work met Madera’s 85 mph wind code and current building standards. We give you a close-out packet with all of it: permit, inspection sign-offs, material specs, and your signed 365-Day Done Right Promise. If an adjuster asks what was built and to what standard, you’ll have the answer in a folder, not a memory.
Older wood-frame homes in Madera, especially the early 20th-century craftsman and bungalow stock near downtown, often sit on perimeter foundations with little or no bolting to the sill plate. Madera’s building department may require seismic retrofit elements like anchor bolts, shear panels, or strapping before you can legally open up walls for a remodel. That adds cost to the bid, but it’s not optional once the inspector sees the existing condition. We include retrofit scope in the original written quote when we see it during site assessment, so it’s not a surprise change order. Estimates are free at (559) 785-2712.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Madera and the Central Valley with written prices and a one-year guarantee on every project.
