Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Fresno?
Metal roof installation in Fresno typically runs $15,000 to $40,000 for a standard single-family home, with most homeowners in neighborhoods like Woodward Park, Tower District, and Sunnyside landing between $18,000 and $28,000 for a standing seam or stone-coated steel system. That range covers tear-off of the existing roof, underlayment, metal panels, flashing, and full cleanup. The final number moves on three things: roof square footage, metal type, and how much prep work the existing roof structure needs before the first panel goes down.
Fresno’s climate pushes metal roofing prices in a specific direction. Our 100-plus-degree summers and the hard UV exposure we get from April through October mean homeowners here often choose reflective PVDF coatings, which add roughly $1.50 to $3.00 per square foot but cut attic temperatures by a measurable margin. More on that below.
Key Takeaways
- Average cost: $15,000 – $40,000 for a typical Fresno home; $18,000 – $28,000 is the most common range.
- Per-square-foot cost: $12 – $20 installed for standing seam; $8 – $14 for exposed-fastener panels.
- Cost drivers: panel type, roof complexity, tear-off requirements, and coating system.
- Timeline: 3 – 7 days for most single-family homes, weather permitting.
- Written pricing: Bradford Remodeling puts every metal roof number in writing before work starts. No re-quotes at the door.
If you want to skip straight to a real number for your roof, call (559) 785-2712 for a free estimate. We’ll measure the roof, walk the roof plane with you, and hand you a written price the same visit.
Metal Roof Installation Cost Breakdown (2026)
Here’s how a metal roof job in Fresno actually breaks down by line item. These are real numbers from our market, not national averages adjusted for guesswork.
| Line Item | Typical Range | Notes |
|---|---|---|
| Tear-off & disposal of existing roof | $1,500 – $4,500 | Depends on layers (one layer of comp shingle vs. two) and roof height. |
| Underlayment & decking repair | $1,200 – $3,800 | Includes synthetic underlayment; plywood replacement runs $70 – $100 per sheet. |
| Metal panels (material only) | $6 – $14 per sq. ft. | Exposed-fastener at the low end; standing seam at the high end. |
| Labor & installation | $4 – $8 per sq. ft. | Includes panel cutting, fastening, and edge detailing. |
| Flashing, trim, ridge caps | $800 – $2,500 | Valleys, eaves, rakes, and penetrations all need custom metal work. |
| Coating system (if applicable) | $1.50 – $3 per sq. ft. | PVDF (Kynar 500) for reflective, fade-resistant finish. Worth it in Fresno. |
| Permits & inspection | $300 – $800 | City of Fresno building permit plus final inspection. |
| Site cleanup & disposal fees | $400 – $1,200 | Dumpster rental, magnet sweep for fasteners, final walk with homeowner. |
So a 2,000-square-foot single-story home with a simple gable roof, one layer of existing composition shingles, and a standard standing seam system would land around $24,000 – $32,000 all in. A 1,400-square-foot rancher with exposed-fastener panels and no tear-off could come in under $15,000. A 3,500-square-foot two-story with multiple roof planes, skylights, and stone-coated steel could push past $40,000.
What moves the number the most is panel type. Standing seam is the gold standard in Fresno because the concealed fasteners don’t back out in our heat-cold cycles the way exposed fasteners can over 15 – 20 years. Exposed-fastener panels are cheaper upfront and fine for sheds, shops, and detached garages, but for the main house we tell homeowners the truth: the $3 – $6 per square foot you save now often becomes a maintenance line item later. That’s a straight trade-off, not an upsell.
What Affects Metal Roof Installation Pricing in Fresno
- Roof square footage and roof pitch. A 4/12 pitch is straightforward. A 7/12 or steeper roof on older Fig Garden or Old Fig homes means harness work, fall protection, and slower panel installation. Steeper roofs consistently add $1 – $2 per square foot in labor.
- Tear-off and decking condition. Fresno homes built before 1980 often have 3/8-inch plywood decking that’s delaminated at the edges after 40-plus summers. If the decking won’t hold a fastener, it gets replaced. That’s $70 – $100 per sheet and it’s non-negotiable when it’s failing.
- Panel profile and metal gauge. 26-gauge is standard and holds up well to Fresno’s thermal swings. 24-gauge is thicker, costs about 15% more, and is the choice for homeowners who want the roof to outlast them. Gauge matters more in metal than in almost any other roofing material.
- Coating system. Standard polyester coatings are cheaper but fade noticeably under Fresno sun within 8 – 10 years. PVDF resin coatings (Kynar 500 is the name most homeowners recognize) hold color for 20 – 30 years and reflect heat better. The upgrade is real money, and it’s the single best value decision most Fresno homeowners make on a metal roof.
- Number of penetrations and roof features. Skylights, vent pipes, chimneys, and dormers all need custom flashing. Every penetration adds $150 – $400 in fabricated metal work. A roof with six penetrations costs visibly more than one with two.
- Time of year. Metal roofing runs year-round in Fresno, but July and August installs are brutal on crews. Some contractors add a seasonal labor surcharge. Bradford Remodeling doesn’t reprice for season, but scheduling is tighter in summer because we cap daily crew hours for safety.
One more Fresno-specific factor: our wildfire-adjacent zones in the northeast foothills. Homes in the brush-prone areas near Millerton Lake and up Tollhouse Road often fall under stricter roof assembly requirements for ember resistance. That changes underlayment specs and sometimes panel profile. If a homeowner asks, we explain it. If a contractor ignores it, run.
Metal Roofing vs. Other Roof Types in Fresno
Before you commit, it’s worth seeing metal against what most Fresno homes have on them right now. Here’s the straight version:
- Asphalt composition shingles: $8,000 – $20,000 for a roof replacement in Fresno. That’s the classic 30-year architectural shingle. Cheapest upfront, and it’s what most homes in the city were built with. But Fresno’s heat cooks shingles. You’ll get 18 – 22 real years before granule loss and curling set in. Metal roof, by contrast, runs $15,000 – $40,000 but lasts 40 – 60 years with a proper coating.
- Tile roofing: common in the Spanish-style homes scattered through Sunnyside and Roosevelt. A full tile job runs roughly $18,000 – $40,000, comparable to metal, but tile is heavier and repairs are awkward. Tile roof repair in Fresno runs $600 – $2,500 per event, and cracked tile is a regular part of life in hail years. Metal sheds impact better.
- Metal: the highest upfront among common options, but the math changes when you spread it over 50 years. That’s two or even three shingle replacements versus one metal roof. If you plan to stay in the home 10 – 15 years, the shingle is the better financial play. If this is the forever house, metal wins on lifetime cost.
The number that matters: over a 50-year window, a $12,000 shingle roof replaced three times costs roughly $36,000 – $45,000 in today’s dollars (assuming material and labor inflation), versus one $28,000 metal roof. That’s not a promise, but it’s a real calculation we walk through with homeowners before they sign anything.
How to Save on Metal Roof Installation
A few practical ways to keep the number down without cutting corners:
- Time the project in the shoulder seasons. October through November and February through March are the slowest months for roofing in Fresno. Suppliers run material promotions in these windows, and those savings pass through to the final price. Call in September to book October.
- Keep the roof design simple on new construction. If you’re also planning a home addition or building from scratch, a simple gable roof with few dormers and penetrations can save $3,000 – $8,000 versus a complex hip roof with multiple valleys.
- Choose exposed-fastener panels for non-living structures. A detached garage, workshop, or ADU doesn’t need standing seam. Exposed-fastener panels on an outbuilding saves $3 – $6 per square foot on that structure while the main house gets the premium system.
- Ask about off-season material pricing. Steel pricing moves with the market, and roofing material suppliers in the Central Valley often have overstock on certain colors in the winter. If you’re flexible on color, we can pass on real savings.
- Get the written price, then compare apples to apples. A low bid that doesn’t include tear-off, underlayment, or flashing is not a low bid. It’s a bid with hidden invoices coming. Bradford Remodeling writes every line item in the scope before work starts. When you compare our number to another, make sure both sheets list the same scope. You can call (559) 785-2712 and we’ll walk you through how to read a roofing quote line by line, ours or anyone else’s.
Saving money and cutting corners are not the same thing. The cheapest way to save on a metal roof is to do it once, do it right, and not have to redo anything. That’s the whole game.
What to Expect During a Metal Roof Installation in Fresno
If you haven’t been through a roof replacement before, here’s the sequence from the day materials land to the day the dumpster leaves.
Day 1-2: Tear-off and decking inspection. The old roof comes off down to the decking. This is where we find what the old roof was hiding. In Fresno, that’s usually dry rot around penetrations, lifted plywood seams, and the occasional old termite damage at the eaves. Any decking that doesn’t hold a screw gets replaced, documented, and shown to you before panels go on.
Day 2-3: Underlayment and edge metal. Synthetic underlayment goes down over the decking, then eave flashing, rake trim, and valley metal. This is the waterproofing layer that actually keeps the house dry. The metal panels are the armor; the underlayment is the seal.
Day 3-6: Panel installation. Panels get cut on-site, screwed or clipped into place, and locked together. Standing seam uses concealed clips that allow the metal to expand and contract with Fresno’s temperature swings, which matters more here than in coastal climates. A 40-degree swing between a summer morning and afternoon is routine. Exposed-fastener panels move differently and that’s why we limit them to outbuildings.
Day 6-7: Trim-out, final fastening pass, and cleanup. Ridge caps, pipe boots, and chimney flashing go in. Then the crew does a full fastener tour, checking torque and seam lock. Then cleanup: magnet sweep for metal shavings, gutter check, and a final walk with you. When we hand you the written 365-Day Done Right Promise, the site is clean and the scope is closed.
That’s what “squared away” means to us. Not a verbal promise. A signed piece of paper in your hand that says the job is done and the guarantee starts that day.
Metal Roof Installation in Fresno: Get a Written Price
Bradford Remodeling Co Fresno has been part of the Garrison Partners family since 2004, held to The Garrison Standard on every job. That standard is simple: a written price before any work starts, background-checked and uniformed technicians on your roof, name-brand materials with manufacturer specs we can show you, and a 365-Day Done Right Promise on paper when the job closes. If the work fails inside that year, we come back and correct it at no charge. A live person answers our phone 24 hours a day, 7 days a week.
If you’re thinking about a metal roof for your Fresno home, start by reading our full guide to metal roof installation in Fresno, then call (559) 785-2712 for a free estimate. Curtis Lane and the team will measure your roof, talk through panel options, and hand you a written number before we leave the driveway. No pressure, no “limited time” games. Just the number, in writing, with the guarantee attached.
If you’d like to see more of what we do across the rest of the house, start at our home page or give us a call. The phone rings to a real person, any hour.
FAQs – Metal Roof Installation Cost in Fresno
Is a metal roof worth the extra cost in Fresno?
For a long-term house, yes. Metal runs $15,000 – $40,000 in Fresno versus $8,000 – $20,000 for an asphalt shingle roof, but a metal roof with a PVDF coating will outlast two or three shingle roofs in our sun and heat. If you’re staying in the home 15-plus years, metal comes out ahead on lifetime cost. Call (559) 785-2712 and we’ll run the math for your specific roof.
How long does a metal roof installation take in Fresno?
Most single-family homes in Fresno take 3 to 7 days from tear-off to final cleanup. A simple 1,800-square-foot rancher can finish in three days. A complex two-story with multiple valleys and skylights can stretch to seven. Weather delays are rare between April and November, but valley fog in winter can slow waterproofing steps.
What’s the cheapest metal roof option available in Fresno?
Exposed-fastener steel panels are the cheapest metal option at $8 – $14 per square foot installed, which puts a small home around $12,000 – $15,000. We steer those panels toward detached garages, shops, and workshops. For the main house, stone-coated steel or standing seam at $12 – $20 per square foot is the standard we recommend, because the fastener system holds up better to Fresno’s temperature swings.
Does a metal roof lower cooling costs in Fresno?
A reflective PVDF-coated metal roof can drop attic temperatures by 20 – 40 degrees in a Fresno summer, which typically translates to a 10 – 20% reduction in cooling load on the hottest days. The specific number for your home depends on insulation, attic ventilation, and roof orientation. It’s not a magic bill killer, but it’s a measurable effect.
Can you install a metal roof over my existing shingles?
Code allows it in some cases, but we don’t recommend it in Fresno. Over-roofing traps heat, hides decking rot, and voids most metal panel manufacturer warranties. The right move is tear-off to the decking, inspection, repair, and a clean install. That’s the only way a written guarantee means anything. Call (559) 785-2712 for an honest read on your specific roof.
Does Bradford Remodeling offer financing for metal roof installation?
We keep pricing straightforward: a written price before work starts, with the full scope itemized. Financing options change by year and by credit profile, and we’ll tell you what’s available when you call. No credit checks before a conversation, no surprise terms. Call (559) 785-2712 and we’ll talk numbers plainly.
Pricing reflects the Fresno market as of 2026. Bradford Remodeling Co Fresno offers free estimates – call (559) 785-2712.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving the Fresno area since 2004 and held to The Garrison Standard on every project.
What Our Customers Say
"Straightforward people who do what they say. The crew did what the contract said and called before changing anything."
- Dianne W."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
