Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterCabinets & Countertops in Fresno, CA
Cabinets and countertops form the working core of any Fresno kitchen. They carry the daily load of meal prep, storage, and family traffic, and they set the visual tone for the entire room. Bradford Remodeling Co Fresno handles both trades together, which means the cabinets and the surfaces are specified, ordered, installed, and warranted as one coordinated scope rather than two disconnected jobs. If you’re planning Full Kitchen Remodeling or just replacing worn-out boxes and tops, call us at (559) 785-2712 and we’ll give you a written price before any work starts.
This work sits under our broader Kitchen Remodeling in Fresno service. Some homeowners come to us needing only cabinets and countertops, and that’s a job we’ll quote on its own. Others fold this scope into a larger remodel that includes layout changes, plumbing rough-ins, and lighting. Either way, the same rules apply: a documented scope, a written price, and a full-year guarantee in your hand when the crew packs up.
Our name-brand material roster includes KraftMaid and Wellborn for cabinetry, and Cambria and Caesarstone for countertops, among others. That means every component on your job carries a manufacturer specification and warranty, not just our word. Curtis Lane runs the operation locally, held to the Garrison Partners standard since 2004.
Key Takeaways
- Cabinets and countertops in Fresno typically run $9,000 to $28,000 for a full kitchen, depending on material grade, cabinet count, and surface square footage.
- You get a written price before any work begins, and that number does not move at the door.
- Every completed job carries the 365-Day Done Right Promise: if the work fails within a year, we return and correct it at no charge.
- We install documented brands like KraftMaid, Wellborn, Cambria, and Caesarstone, so specifications are traceable.
- Call (559) 785-2712 for a free estimate, and a live person answers, 24/7.
When You Need Cabinets & Countertops
Fresno homeowners put their kitchens through a lot. Summer heat, hard water from the local supply, and years of daily use all take a toll. Here’s what pushes most of our clients to pick up the phone:
- Water damage at the sink base. The cabinet under the kitchen sink fails first in most Fresno homes. A slow leak or a garbage-disposal drip swells the particleboard, and the floor of the cabinet starts to sag. If the face frames are solid but the boxes are shot, replacement beats repair every time.
- Delaminating countertop edges. Laminate tops start to peel at the seams after years of moisture and heat. Once water gets under the laminate near the sink, the substrate swells and the surface won’t lay flat again.
- Drawer slides and hinges that don’t hold. Soft-close hardware wears out, especially on the drawer that holds the pots and pans. When adjustments stop working and the drawer sags at an angle, the box itself has usually twisted.
- Granite or quartz that’s stained or cracked. Natural stone and engineered quartz both have limits. A crack running from the cooktop cutout outward is a structural issue, not a cosmetic one. In neighborhoods like Woodward Park and Fig Garden, where homes run 2,500 square feet and up, we replace these tops regularly.
- Cabinet boxes that were never right from day one. Production-grade boxes with stapled backs and exposed particleboard edges start breaking down within five to seven years. Homeowners in Clovis and northeast Fresno who bought new construction a decade ago are now dealing with this exact problem.
- Kitchen layout that fights you. If you’ve got a corner base cabinet you can’t reach into and a pantry that wastes 18 inches of dead space, the fix isn’t another organizer. It’s new cabinetry configured for how you actually cook.
If more than one of these sounds familiar, it’s usually more cost-effective to replace cabinets and countertops together in a single scope than to patch them piecemeal. We’ll walk you through the numbers either way.
Our Cabinets & Countertops Process
We run this trade on a tight sequence. No surprises, no gaps where a homeowner is left wondering who’s showing up next. Here’s how a typical job goes from first call to final walkthrough:
- Phone call and site visit. You call (559) 785-2712, a live person answers, and we schedule a visit. Curtis Lane or a lead technician comes out, takes measurements, checks the cabinet boxes and the countertop substrate, and asks how you use the kitchen. We need to know what’s failing and what’s just dated before we quote anything.
- Written scope and price. We give you a line-item written price. The cabinet line shows the cabinet line, the countertop line shows the slab or the laminate, and the labor is broken out. No verbal ballpark, no number that moves when the crew arrives. This is the Garrison Standard, and it’s not optional.
- Material selection and order. You pick from KraftMaid or Wellborn cabinets and Cambria or Caesarstone surfaces, or we spec laminate or butcher block if the budget calls for it. Every selection goes into the written scope with the manufacturer name, color code, and door style. The order goes in only after you’ve signed off on that document.
- Demolition and prep. We remove the old cabinets and tops, and we inspect the wall studs and the floor before anything new goes in. In older Fresno homes, it’s common to find out-of-level floors or studs that have shifted. We correct the substrate first, because a perfectly square cabinet on a crooked wall still looks crooked.
- Installation and countertop template. Cabinets go in first, leveled and anchored. Then the countertop fabricator templates the actual installed boxes, not the plan dimensions. That’s the only way to get seams and overhangs right. Tops go in after fabrication, and then plumbing reconnects.
- Final walkthrough and written guarantee. We clean the site, walk you through the installed work line by line against the scope, and hand you the signed 365-Day Done Right Promise. If a drawer binds or a seam opens within a year, we come back and fix it, no charge.
Cabinets & Countertops Pricing in Fresno
Cabinets and countertops in Fresno range widely because the materials themselves range widely. A modest galley kitchen with stock KraftMaid boxes and laminate tops runs lower, while our Kitchen Remodeling services for a full kitchen with Wellborn custom cabinets and Cambria quartz runs higher. Here’s where the numbers land for most jobs we quote in this market:
| Scope | Typical Price Range | What’s Included |
|---|---|---|
| Stock cabinets only, small kitchen (8-10 boxes) | $4,000 – $8,000 | KraftMaid stock line, standard hinges, basic crown |
| Semi-custom cabinets, full kitchen (14-18 boxes) | $8,000 – $16,000 | KraftMaid or entry Wellborn, soft-close, pull-outs |
| Custom cabinets, full kitchen | $16,000 – $30,000+ | Fully custom Wellborn specs, built-ins, island detail |
| Laminate countertops, 40-50 sq ft | $1,800 – $3,500 | Material, fabrication, install, sink cutout |
| Quartz or granite countertops, 40-50 sq ft | $3,800 – $7,500 | Cambria or Caesarstone slab, fabrication, install |
| Full cabinet + countertop replacement, typical kitchen | $9,000 – $28,000 | Demolition, prep, cabinets, tops, plumbing reconnect |
What moves the number? Cabinet construction matters more than most people think. Particleboard boxes cost less than plywood boxes and don’t hold up as well in a humid Fresno summer, especially near the sink or dishwasher. Full-overlay doors with soft-close hardware cost more than standard overlay with standard hinges. Countertop material is the other big swing: laminate is the least expensive, butcher block sits in the middle, and quartz and granite run the highest, with edge profiles and seam counts adding to fabrication cost.
We give you the written price before any work starts, and that’s exactly what you pay unless you change the scope. If you want to adjust cabinet hardware or upgrade the countertop edge profile mid-project, we re-quote the change in writing before we order it. No numbers that move at the door. For an exact number on your kitchen, call (559) 785-2712 and we’ll send someone out. The estimate is free.
Why the Material Brand Matters
We install KraftMaid and Wellborn cabinetry, and Cambria and Caesarstone countertops, because these manufacturers publish their specifications and stand behind their products with written warranties. That matters on a Fresno job because the climate works against cheap materials. Summer temperatures push past 100 degrees, and a kitchen with poor ventilation sees real heat and humidity swings. A particleboard box with a thermofoil door will delaminate faster here than in a coastal market. We specify materials that are documented to hold up, and the manufacturer warranty backs what our own guarantee doesn’t cover.
The same logic applies to countertops. Cambria and Caesarstone are engineered quartz with consistent slab-to-slab color and published performance specs. Natural granite varies from slab to slab, which is fine if you like the character, but it also varies in porosity and stain resistance. We walk you through the trade-offs in plain terms and let you pick. The brand goes in the written scope either way, so there’s no substitution game on delivery day.
What “Done” Looks Like
A squared-away cabinet and countertop job in Fresno ends a specific way. The site is clean. The old cabinets and slabs are hauled off, not left at the curb. The new doors are adjusted so every reveal is even and every soft-close mechanism engages the way it should. The countertop seams are tight and consistent, and the sink and faucet are connected and tested. You have a written scope in one hand and a signed 365-Day Done Right Promise in the other, and the crew is gone by the time we said they’d be gone.
That’s the Garrison Standard, and Curtis Lane holds every job to it. If something isn’t right at walkthrough, it gets written down and corrected before we call the job complete. If it fails within the guarantee window, you call the same number, (559) 785-2712, and we come back. No arguing about who’s responsible.
FAQs – Cabinets & Countertops
How much does it cost to replace cabinets and countertops in Fresno?
For a typical Fresno kitchen, replacing cabinets and countertops together runs $9,000 to $28,000, with the final number set by cabinet construction, countertop material, and the size of the kitchen. A basic galley with stock cabinets and laminate tops lands at the low end; a full kitchen with semi-custom cabinets and quartz lands in the middle to upper end. We also offer Kitchen Island Installation as part of larger projects. Call (559) 785-2712 for a free written estimate on your specific kitchen.
Is it cheaper to repair or replace kitchen cabinets?
It depends on what’s failing. New hinges and drawer slides are cheap, and a face-frame repair is usually worth doing. But when the cabinet boxes themselves are water-damaged, delaminated, or structurally twisted, replacement costs less over time because repairs to particleboard boxes don’t hold. We’ll tell you which side of that line your kitchen falls on before we quote anything.
Can you install new countertops without replacing the cabinets?
Yes, if the cabinet boxes are square, dry, and structurally sound. We’ll inspect the substrate and the cabinet tops before recommending a countertop-only scope, because countertops installed on sagging or water-damaged cabinets will fail at the seams. In Fresno, the sink base is the usual culprit, and we won’t put a new slab on a box that’s about to give out.
How long does a cabinet and countertop job take in Fresno?
Most full cabinet and countertop replacements run three to five weeks from start to signed walkthrough, depending on cabinet lead time, countertop fabrication, and Kitchen Design & Layout complexity. Stock cabinets arrive faster than custom, and quartz fabrication typically adds one to two weeks. We’ll give you a schedule in writing with the price so you can plan around it.
Can you come today to look at my kitchen?
We can often get someone out same day or next day, and we’ll always give you a specific time window, not a four-hour range. Call (559) 785-2712 and a live person will get you on the schedule. The site visit and written estimate are free.
If you’re ready to get a straight number on cabinets and countertops in Fresno, call Bradford Remodeling Co Fresno at (559) 785-2712. A live person answers around the clock, and we’ll set a time to walk your kitchen, check the substrate, and hand you a written price. No pressure, no surprises, and the work is guaranteed for a full year in writing. Visit our home page to see the full scope of what we do.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Fresno.
