Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Fresno, CA
Cabinet installation and refacing in Fresno typically costs between $4,500 and $18,000 depending on kitchen size, cabinet count, and whether you’re replacing boxes or refacing what’s already there. Refacing usually runs 40 – 60% less than full replacement. Bradford Remodeling Co Fresno puts a written price in your hand before any work starts, and every finished job carries our 365-Day Done Right Promise in writing.
If you’re weighing cabinet work against a larger Kitchen Remodeling in Fresno project, cabinets are usually the single biggest line item. Get them right and the rest of the kitchen follows. Get them wrong and you’ll see it every single day. Our crews install and reface cabinetry from KraftMaid and Wellborn, with Cambria and Caesarstone tops where the project calls for them. The specs are documented, the materials are traceable, and the price doesn’t move at the door. Call us at (559) 785-2712 and we’ll walk you through what your kitchen actually needs.
This page covers how we handle cabinet installation and refacing as a focused service under Kitchen Remodeling, what it costs in the Fresno market, how the process runs, and what our guarantee covers if something fails after we leave.
Key Takeaways
- Cabinet refacing in Fresno runs roughly $4,500 – $9,000 for a typical 10×10 kitchen; full replacement with new boxes runs $8,000 – $18,000.
- Every Bradford job starts with a written price and ends with a signed 365-Day Done Right Promise.
- We install documented brands – KraftMaid, Wellborn, Cambria, Caesarstone – not whatever the supply house had on sale.
- Background-checked, uniformed technicians. You’ll know who’s walking in before they arrive.
- Live person answers the phone 24/7 at (559) 785-2712. No voicemail tree.
When You Need Cabinet Installation & Refacing
Not every kitchen needs to be torn down to the studs. Sometimes the bones are fine and the faces are shot. Here’s what actually pushes Fresno homeowners toward cabinet work:
- Doors are delaminating or peeling. In Fresno’s dry summer heat, laminate and thermofoil doors fail at the edges first. Once the substrate starts showing, refacing is usually the fix.
- Boxes are solid but the look is dated. Oak raised-panel cabinets from the 1990s are everywhere in Woodward Park and Sunnyside. If the boxes are square and the drawers slide, refacing turns them into a modern kitchen for about half the cost of replacement.
- You’re already doing countertops. If the old tops are coming off anyway, refacing at the same time avoids reworking the cabinets twice. The seam between cabinet face and countertop is where sloppy work shows first.
- Drawer slides are failing or doors don’t close square. That’s often hardware, not the cabinet box. We replace slides, hinges, and soft-close hardware as part of a reface, which is far cheaper than new boxes.
- The layout dead-ends but the room size is fixed. Maybe you need a pull-out trash cabinet, a deeper pantry cabinet, or an island where a table used to sit. That’s installation work, not just refacing.
- Water damage under the sink or around the dishwasher. Fresno homes built before 2000 often have particleboard sink bases that have swollen and crumbled. If the damage is localized, we replace the affected cabinet and reface the rest to match.
If you’re somewhere in that list, the next question is simple: repair or replace? We’ll give you a straight answer based on what the boxes actually look like under the doors, not what’s easier for us to sell. That answer comes in writing.
Our Cabinet Installation & Refacing Process
We run cabinet work the same way we run every Bradford project: documented scope, written price, clean close. No surprises between the estimate and the final walk-through. Here’s the sequence:
- Site measure and box inspection. We open doors, check for square, look for water damage, measure soffits and rough-ins. If the existing boxes can carry refaced fronts, we say so. If they can’t, we say that too. The number we write down is the number you get.
- Written scope and material spec. We put the cabinet line, door style, finish, hardware, and countertop interface in writing. KraftMaid or Wellborn boxes where replacement is needed. Refacing materials spec’d to the exact door profile and finish. No oral agreements, no “trust me” on the materials.
- Permit check. Most cabinet-only work in Fresno doesn’t trigger a permit, but if you’re moving plumbing or electrical for an island or a pantry pull-out, we handle the permit conversation before work starts. Not after the inspector shows up.
- Installation and refacing. Boxes are set level and shimmed to the house, not to each other. Doors are hung square and adjusted until they close like they should. Refaced panels are applied over a clean, solid substrate. Soft-close hardware is set and tested on every door and drawer.
- Adjustment pass. After install, we walk every door and drawer, adjust hinges and slides where anything binds, and torque all hardware. If a door drifts after a week of use, we fix it under the guarantee.
- Squared-away close. Site is swept, boxes are broken down and hauled, the scope is checked off against the written agreement, and you get the signed 365-Day Done Right Promise in your hand before we leave. That’s the standard. It’s not a request; it’s how every job closes.
This process is The Garrison Standard in practice. It’s the framework Garrison Partners has held member businesses to since 2004, and it’s why we put every promise in writing instead of leaving it to a handshake.
Cabinet Installation & Refacing Pricing in Fresno
Straight numbers, since that’s what actually helps you plan. Cabinet work in Fresno clusters into three ranges depending on what you’re starting with and your Kitchen Design & Layout.
| Scope | Typical Range in Fresno | What It Includes |
|---|---|---|
| Refacing only (10×10 kitchen) | $4,500 – $9,000 | New door and drawer fronts, veneer over existing boxes, hinges and pulls, soft-close hardware |
| Partial replacement (island, pantry, or damaged bases) | $3,000 – $7,000 | New KraftMaid or Wellborn boxes for the affected run, matched to refaced existing cabinets |
| Full replacement (10×10 kitchen, mid-grade) | $8,000 – $18,000 | New boxes, doors, hardware, crown, and installation. Stone tops are additional. |
What moves the number: cabinet count and run length, ceiling height (taller uppers cost more), door profile and finish, whether you’re adding an island or pantry pull-outs, and whether the existing boxes are square enough to reface at all. Countertops, if you’re doing them as part of Cabinets & Countertops, are a separate line item. We use Cambria and Caesarstone for quartz, and we spec the slab before we write the price.
One thing to know about Fresno specifically: the Central Valley gets hot enough that cheap thermofoil doors will fail at the edges within a few seasons. We don’t install them. If you’ve been burned by peeling cabinet fronts before, ask us what we spec instead. The answer is in the written scope, not in a sales pitch.
Every estimate is free. The price we give you before work starts is the price on your final invoice. That’s the no-hassle upfront pricing commitment, and it’s how Bradford has operated from day one. Call (559) 785-2712 and we’ll measure, inspect, and hand you a written number.
What “Done Right” Actually Covers
The 365-Day Done Right Promise is a written guarantee on every project. If cabinet work we installed or refaced fails within one full year of completion – hinges pulling out, veneer lifting, doors out of square, soft-close hardware failing – we come back and correct it at no charge. No re-quote, no service fee, no argument about whose fault it is. If it’s our work and it didn’t hold, it’s our return visit.
Here’s the part that matters: it’s in writing. You get a signed guarantee document at close, not a verbal “call us if anything happens.” You’ll know exactly what’s covered and for how long. That’s the difference between a contractor who asks for trust and one who gives it to you in writing. The Garrison Code sets this standard at the Garrison Partners level, and every Bradford location operates under it.
We also back the materials, not just the labor. KraftMaid and Wellborn carry manufacturer warranties on their boxes and finishes. Cambria and Caesarstone carry their own surface warranties. We document every product spec in your project file, so if a manufacturer warranty claim is ever needed, we can pull the paperwork instead of shrugging.
Who Shows Up at Your Door
Background-checked, uniformed Bradford technicians on every job. Not day labor, not subcontractors we’ve never met. The people who measure, install, and adjust your cabinets are the same people whose names are on the work order. You’ll know who’s coming before they arrive, and they’ll be in a Bradford uniform when they get there.
And if something comes up at 11 p.m. the night before your install – a question, a timing change, a worry – a live person answers the phone. 24/7. Not a voicemail. Not a callback queue. A real human at (559) 785-2712. That’s been the Bradford standard since the beginning, and it doesn’t switch off after business hours.
FAQs – Cabinet Installation & Refacing
How much does cabinet refacing cost in Fresno?
Cabinet refacing in Fresno typically costs $4,500 to $9,000 for a standard 10×10 kitchen, depending on door profile, finish, and hardware. Refacing runs about 40 – 60% less than full cabinet replacement. Call (559) 785-2712 for a written quote – estimates are free and there’s no obligation.
Is it cheaper to reface or replace kitchen cabinets?
Refacing is almost always cheaper, usually by 40 – 60%, because you’re keeping the existing boxes and replacing only the visible surfaces. But refacing only makes sense if the boxes are square, dry, and structurally sound. If the substrate is water-damaged or the boxes are pulling away from the wall, replacement is the honest call. We’ll inspect and tell you which one you actually need, in writing.
How long does cabinet installation take in Fresno?
A typical refacing job takes 3 to 5 working days once materials are in. Full Kitchen Remodeling runs 5 to 8 working days depending on cabinet count and whether countertops are in the same scope. We give you a start date and a finish date in the written agreement, and we hit them.
Can you match new cabinets to my existing ones?
In many cases, yes, if the door profile and finish are still in production or can be reproduced by the refacing supplier. If an exact match isn’t possible, we’ll tell you before you spend a dollar and show you the closest available options in the finished sample. You’ll never pay for a mismatch we knew about upfront.
Does Bradford Remodeling Co Fresno offer free estimates for cabinet work?
Yes. Every estimate is free, and the price we write down before any work starts is the price you pay at the end. No numbers that move at the door. Call (559) 785-2712 to schedule a site measure.
Cabinet Work That Holds Up in the Central Valley
Fresno’s climate punishes cheap cabinet work. Summer heat cycles swell and shrink wood; dry air pulls moisture out of veneers; kitchens in older Fresno neighborhoods often sit on slabs that shift enough to throw cabinet runs out of square over a decade or two. None of that is a surprise to a cabinet installer who’s worked here long enough. It’s why we inspect boxes before we quote, why we spec materials built for our climate, and why the guarantee is in writing instead of implied.
From the home page through every service page, Bradford Remodeling Co Fresno runs on one idea: write it down, do it right, stand behind it. Cabinet installation and refacing is no different. Call (559) 785-2712 for a free estimate, and you’ll have a written price and a clear scope in hand before a single tool comes out.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fresno, serving Fresno.
